DOWNLOAD TECNO M7 STOCK ROM


Learn how to unbrick/flash this device using sp flash tool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, the device will be completely dead 
(can't power on, can't charge and will not be detected by a computer)


Dual-SIM
Dimensions: 146.7 x 76 x 10.4 mm
1 GB RAM, 4GB Internal Memory,supports up to 32GB microSD card

5-inch Capacitive Touch Display (480 x 854 pixels, 195 ppi)
8.0MP Camera with Flash
1.3MP Secondary Camera
Android 4.2 OS (Jelly Bean)
1.3 GHz Dual-core Processor
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21Mbps)
2000mAH Battery Capacity



TECNO M7 STOCK ROM
DOWNLOAD


16 comments:

  1. Hello, I downloaded for M7 but am getting arror as BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

    ReplyDelete
  2. Thanks a lot bro my tecno m7 mobile it's return to life.Jesus Crist Blass you Brother.

    ReplyDelete
  3. I downloaded the file,but after formatting,instead of read flash, it won't, it will just hang there what should I do,d phone is not even owning again ,bcos the phone was formatted before it reads flash,but instead to read flash ,it won .

    ReplyDelete
  4. Am Chris from IMO state ,I have same issue (brom error s DL pmt err no space (5069) ) have formated the phone and its to coming on again

    ReplyDelete
    Replies
    1. U need to use the update firmware and flash your phone again

      Delete
    2. Until cache and userdata. Use download only... Voilla

      Delete
  5. I can't download because of many adds

    ReplyDelete
  6. what can i do if that error occurred

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...