DOWNLOAD TECNO S3 STOCK ROM


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device



If you encounter any error while flashing your device, click here and see if it solves your problem

Tecno S3 QUICK SPECS
Dimensions: 116 x 62 x 11.9 mm
Storage: 4GB ROM up to 32GB microSD card
Memory: 512MB RAM
Display: 3.5-inch IPS Touch Display (320 x 480 pixels, 165 ppi)
Rear Camera: 3 MP Camera with Flash, Autofocus
Front Camera: 0.3 MP Secondary Camera
Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.0GHz Dual-core Processor
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21 Mbps)
2000 mAH Battery Capacity


TECNO S3 STOCK ROM
S3-G130-V1.3-C2BOM-20130909

Report if you cannot download any of these files.
Like and share
Donate to support this site

11 comments:

  1. invalid imei after flash any solution
































    ReplyDelete
  2. Needed rom for s3+ bro urgent

    ReplyDelete
  3. I need solution, its says DA_SDMMC_WRITE_FAILED

    ReplyDelete
  4. pls we need tecno s3+ stock rom. kindly upload sir.

    ReplyDelete
  5. I enjoyed over read your blog post. Your blog have nice information,
    I got good ideas from this amazing blog.
    goldenslot
    gclub
    gclub casino

    ReplyDelete
  6. Thanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic. If possible, as you gain expertise, would you mind updating your blog with more information? It is extremely helpful for me.
    how to use sp flash tool

    ReplyDelete
  7. i need tecno s3 firmware for this phone S3M-G130-V13-C2BOM-20140112

    ReplyDelete
  8. Hey I need help after flash my S3 with this file phone not on again only please helps.

    ReplyDelete
  9. Hey I need help after flash my S3 with this file phone not on again only please helps.

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...