DOWNLOAD TECNO P9 STOCK ROM


Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using SP MultiPortDownloadTool from here 
Learn how to flash this device using WiseLinkTool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

TECNO P9 SPECS 

Android 4.4 (KitKat) & Android 4.2 (Jelly Bean)

7-inch Touchscreen, 800 x 1200 , IPS 272 ppi 

1.2GHz quad-core Processor

1GB RAM
8GB Internal Memory 
Supports up to 32GB microSD

5MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera 

Dual SIM
EDGE / GPRS 
WCDMA
WIFI 802.11 b/g/n
bluetooth 3.0

4000mAh Battery


TECNO P9 STOCK ROM

P9-T102-20150311
DOWNLOAD ROM 

P9-T102-20141103
DOWNLOAD ROM 


The above ROM is  for the Android 4.4 version only (MT6582)
Please Leave a comment after using this ROM
Report if you cannot download this file.

16 comments:

  1. une remerciement pour le job et pour le partage

    ReplyDelete
  2. i cant download it cos it doesnt support resume

    ReplyDelete
  3. Please i need them 4.2 version please

    ReplyDelete
  4. pls help, if i plug my phone to charge it just continue discharging after I flashed it with this rom

    ReplyDelete
  5. Pls same thing happened to my p9 too after flashed.pls any solution to this

    ReplyDelete
  6. My phone did not charge over 9% after flashing my P9 with this rom

    ReplyDelete
  7. My tecno p9 not increase charging after I use this rom, pls boss help us don't ignore us ooo

    ReplyDelete
  8. av anybody see solution to this charging not increase more than 8 percent for tecno p9???????

    ReplyDelete
    Replies
    1. All you need is to flash it again with this firmware P9-T102-20141103 but I've not had the time to upload it

      Delete
    2. Please I used the above stock rom for tecno P9-T102-20141103 to flash my phone but refused to charge after the flashing process.please help,what should I do.

      Delete
  9. This comment has been removed by the author.

    ReplyDelete
  10. i need 6589 techno p9 firmware

    ReplyDelete
  11. Pls Boss I need p9 T101 442 pls. Or can T102 Work on it? Pls

    ReplyDelete
  12. pls ooooo... i need P9 6589 stock rom....

    ReplyDelete
  13. I flashed a tecno P9 with the P9-T102-20141103 ROM and the phone isn't charging. What to do?

    ReplyDelete
  14. what partition should one uncheck to avoid the effect of not charging?

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...