HOW TO FLASH CHINESE BASIC AND FEATURE PHONES USING MULTI PORT DOWNLOAD TOOL

MultiPortDownloadTool is a another tool from MediaTek used in flashing basic or feature phones. MultiPortDownloadTool can only flash mtk basic or feature phones with firmware containing .cfg file. It should not be confused with MTK SP Multi Port Download Tool. 
If you are looking for MTK SP Multi Port Download Tool to flash scatter based firmware click here


To flash this basic phones, follow the tutorial below

Download an install drivers (feature phones driver) from here
Download MultiPortDownloadTool  v5.1340.00.00  or  v5.1444.00.00

Launch MultiPortFlashDownloadProject.exe
Click OK on the dialogue box that pops up with Fail
Click File and select Open Download Agent File
Select MTK_AllInOne_DA.bin

Now Click Image Folder button
Navigate and select the folder containing the ROM.
Click OK on the window that appears with Load Files Success

Insert battery into the phone.
Open Device manager
Click on Ports (COM & LPT)
Connect the phone
Check and note the COM Port number that appears
Disconnect the phone

Now on Multi Download Tool, tick COM Port number, USB & Select Download ROM and Format
Click Start button on the line with the COM Port number that the phone was connected to.
Connect phone
The process starts with a red bar followed by purple then yellow.
When you see DL OK with 100% yellow bar, the process is complete
You can now disconnect and reboot Phone

If you have null/invalid imei after flashing your device, click here

Follow the screenshot below for the complete process






40 comments:

  1. the com port number on device manager doesnt tally with the preset port numbers on the flasher...what do i do?

    ReplyDelete
    Replies
    1. Click on Options then select Set begin COM port.
      Enter the number you want the COM port to begin with and click apply

      Delete
  2. wow, this really good..i wish to appreciate this man with small recharge card,

    ReplyDelete
  3. wow, this really good..i wish to appreciate this man with small recharge card,

    ReplyDelete
  4. please i am romkingz i have an samsung galaxy which imei number showing null/null please is there anyway to imei the imei

    ReplyDelete
    Replies
    1. Is the samsung galaxy original or cloned ?

      Delete
    2. You are very very funny you want to imei imei

      Delete
  5. please sir (romkingz) I need Motorola rom

    ReplyDelete
  6. thanks a lot bro i flashed my techno t430 well for sure your THE KING OF ROMZ
    I feel to contribute something to keep you going
    Guys this is the site to trust

    ReplyDelete
  7. thanks a lot bro i flashed my techno t430 well for sure your THE KING OF ROMZ
    I feel to contribute something to keep you going
    Guys this is the site to trust

    ReplyDelete
    Replies
    1. What and what do you load befor it work? Because my t430 refuse to on after flashing it

      Delete
  8. Mine is bricked and is there any specific key combination to put it into download mode so as to be recognized by PC in vcom port ?

    ReplyDelete
  9. Mehnn Bro i really appreciate. just flashed a tecno t430 that was giving problem.. May the lord bless you

    ReplyDelete
  10. Hi needing help. I cant flash my T347 due to unrecognized stock rom file.
    Which kind of file do I have to download for?
    Many thanks in advance

    ReplyDelete
  11. my phone is not displaying any com port number after i plug in d usb..it just says done..i would be gratefull if you or anyone it worked for cold explain to me via [email protected] abt dat device manager stuff i dont u understand it even with d animation u showd us on hw to do it..please admin

    ReplyDelete
  12. and am using a tecno t430 phone

    ReplyDelete
  13. FOR Tecno t430 the pac file not working. you can change the firmare.

    ReplyDelete
  14. Image Folder not working At all. Just this ,,,,, Can not file config/scatter files............................

    ReplyDelete
  15. The process does not start, instead it displays the charging animation.
    My phone is tecno t340. Please help

    ReplyDelete
    Replies
    1. You need to hold a boot key before connecting the phone to PC.
      For tecno use either the key above call end button or the middle button inside navigation pad.

      Delete
    2. hello Rkingz i would appreciate boot keys for itel 5310 , thanks in advance

      Delete
  16. The com number is not included in multiparty my phone is t410

    ReplyDelete
    Replies
    1. Click options and select Set begin COM Port. input the COM Port number

      Delete
  17. i flash tecno t 340 flash from http://www.romkingz.net/
    on multiport it give DA ERROR
    ERROR: S_BROM_BBCHIP_HW_VER_INCORRECT(2022)

    ReplyDelete
    Replies
    1. ME TOO, THE SAME PROBLEM. SAME MASSEGE ERROR.

      Delete
  18. I have been trying to flash tecno t483 with your rom but it keeps on writing error on the port line I selected what do I do

    ReplyDelete
  19. hello there! i have samsung clone j500h, 5.1.1, i flashed it but it does not display, it only give out sound when i touch the screen it is detected on pc, and show volume capacity, but it does not showing anything at the display, help please!

    ReplyDelete
  20. help me guys pleasegive me rom ENES G10 mtk657 NAND

    ReplyDelete
  21. Pls the drivers link is not available pls help

    ReplyDelete
  22. hello mr. i downloaded tecno t410 firmware from here, and i flashed it by multiport download tool, but the imei changed and when i insert sim card it detected iNVALID what shoud i dot to change that imei. THANKS DO MUCH

    ReplyDelete
    Replies
    1. Use SN Write tool or Maui Meta 3G to fix ur imei

      Delete
  23. Enter your comment... PLS CAN I FLASH MY TECNO T484. DIS PHONE IS DEAD.

    ReplyDelete
  24. Please give me permision to download the drivers and roms
    Thank you

    ReplyDelete
  25. Access to doc-0c-4s-docs.googleusercontent.com was denied

    You don't have authorization to view this page.
    HTTP ERROR 403
    RELOAD
    this is the respose I get when trying to downlowd multiport download project

    ReplyDelete
  26. please update links not working for the tools

    ReplyDelete
  27. Hello RomKings I'm looking for USB drivers for my tecno t401 please. the link given above is not working. Thanks

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...