DOWNLOAD INNJOO FIRE PLUS STOCK ROM


Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)
INNJOO FIRE SPECS 

Android 4.4 (KitKat) 3G version 
Android 5.1 (lollipop) for LTE version only

5.5-inch Touchscreen, 720 x 1280 pixels IPS 

1GHz quad-core Processor LTE version
MT6735P chipset
Mali - T720
1.4 quad-core processor 3G version
MT6592M
Mali - 400MP GPU

2GB RAM
16 GB Internal Memory 
Supports up to 128GB microSD

13 MP Rear Camera, LED Flash, Auto Focus
5 MP Front Camera 

Dual SIM
EDGE / GPRS 
WCDMA
LTE 
WIFI 802.11 b/g/n
bluetooth 4.0

3600mAh Battery


INNJOO FIRE PLUS LTE STOCK ROM
Android 5.1 Lollipop
DOWNLOAD ROM
726Mb


INNJOO FIRE PLUS 3G STOCK ROM
Android 4.4 KitKat
560Mb


INNJOO FIRE PLUS 3G HD STOCK ROM (Egypt Version)
Android 4.4 KitKat
582Mb

Please Leave a comment after using this ROM
Report if you cannot download this file.

7 comments:

  1. pls i cloud not download this flie it stop at 99.99

    ReplyDelete
  2. what if while flashing the process was interrupted . what should i do ?

    ReplyDelete
    Replies
    1. Reflash if the phone is still detected by PC,
      If PC cannot detect the phone again, read this post here

      Delete
  3. Hello. I bought this phone with android 4.4 but I want to change it to 5.1. Can I load it with the 5.1 here?

    ReplyDelete
  4. please sir,my innjoo fire 2 3G is not display after flashing

    ReplyDelete
    Replies
    1. The modem of your phone is either not calibrated or calibrated badly. Use SN Write Tool or Maui Meta 3G to calibrate.

      Delete
  5. This comment has been removed by the author.

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...