DOWNLOAD ITEL 1701 STOCK ROM / FIRMWARE



Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device

For a more detail tutorial with video and pictures click here

You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices




ITEL IT1701 SPECS 

Android 4.4 (KitKat)

7-inch Touchscreen, 1024 x 600 , IPS 196 ppi 

1.2GHz quad core

1GB RAM
8GB Internal Memory 
Supports up to 32GB microSD

8 MP Rear Camera, LED Flash,
5 MP Front Camera

Dual SIM
EDGE / GPRS 
WIFI 802.11 b/g/n
bluetooth 3.0

3100mAh Battery


ITEL 1701 STOCK ROM
IT1701-V600-20151012
DOWNLOAD ROM

IT1701-V600-20150625


Please Leave a comment after using this ROM
Like and Share
Report if you cannot download this file.

10 comments:

  1. Hi. fdl2.bin is not working. Such, if the software flash fdl1, on the flash of fdl2 it writes operation failed. Your help will be welcome .

    ReplyDelete
  2. My Itel 1701 completely dead during driver installation.cant even detect by PC. Any help plz.

    ReplyDelete
    Replies
    1. REMOVE COVER AND SHORT BATTEERY TERMINAL + _ NAD TRY AGAIN

      Delete
  3. My Itel 1701 completely dead during driver installation.cant even detect by PC. Any help plz.

    ReplyDelete
  4. I need the 5.0 android version pls

    ReplyDelete
  5. I need lollipop for my itel it1701

    ReplyDelete
  6. Good morning bross
    Pls after flashing not seem to have erased but flashing completed successfully

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...