Resistance Retribution is a third person shooter action-aventure game. Yea I know this game is old but the story line says different its totally interesting in many ways. The shooting in this game is intense. In this dramatic story to avenge a fallen brother, help Grayson to to destroy Chimera and retake Euroupe.
So many wapons and different types of ememies.
Play different multiplayer modes wtih your friends via adhoc connections.
Well this game is for PSP so you will have to play it using a PSP emulator.
PPSSPP is the best PSP emulator which is available for android and PC users.
Android users download PPSSPP from here
PC users download PPSSPP from here
Resistance Retribution ISO
Size - 1.29GB
DOWNLOAD
Tips
This game uses the square, triangle, circle and cross button for weapon aim movement. I like using gamepad so prefer playing this game on PC than android. Since I'm using gamepad, I use right analogue stick for weapon aim control :D
If you experience game lagging or running slow on your device, do the following:
Goto settings > Graphics
Frameskipping 1
Spline/Bezier curves quality - low
If its Still slow,
Goto Settings > Audio
Audio latency - low
If its still really slow
Untick Enable sound
To configure 2 players or Multiple players mode,
Both devices must have installed PPSSPP with Resistance Retribution ISO.
Create hotspot on one device and then connect the other device (Data connection is not needed just turn on only hotspot).
Now on both device
Launch PPSSPP
Goto settings > Networking
Tick Enable networking/WLAN (Beta, may break games)
Change PRO adhoc server IP address an input 192.168.43.1
Tick Enable built-in PRO ad hoc server
Now you can connect and play local multiplayer modes.
Download Samsung Galaxy S5 SM-G900T1 Stock Firmware
Samsung Galaxy S5 SM-G900T1 Firmwares
Flash/unbrick or upgrade your device with the firmwares below
using odin
USA
Android 4.4.2
G900T1UVU1ANE7_G900T1TMB1ANE7 (4 files repair firmware)
Android 5.1.1
To flash or upgrade your Galaxy S5 SM-G900T1 with the firmware above,
- Download and install samsung drivers
- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process
For a more detailed process on how to flash or upgrade Samsung devices, click here
For other Samsung
firmwares, click here
Download Motorola G XT1040 Stock Firmware
Dimensions
129.9 x 65.9 x 11.6 mm
720 x 1280 pixels (329 ppi)
Quad-core 1.2 GHz Cortex-A7
Adreno 305
Memory
1 GB RAM
8 GB internal memory
microSD, up to 32 GB
Camera
Back Camera - 5 MP, LED flash
Front Camera - 1.3 MP
Network
GSM / HSPA / LTE
Battery
2070 mAh
129.9 x 65.9 x 11.6 mm
720 x 1280 pixels (329 ppi)
Quad-core 1.2 GHz Cortex-A7
Adreno 305
Memory
1 GB RAM
8 GB internal memory
microSD, up to 32 GB
Camera
Back Camera - 5 MP, LED flash
Front Camera - 1.3 MP
Network
GSM / HSPA / LTE
Battery
2070 mAh
Motorola XT912 Stock Firmware
Dimensions
130.7 x 68.9 x 7.1 mm
4.3 inches 540 x 960 pixels (256 ppi)
Dual-core 1.2 GHz Cortex-A9
PowerVR SGX540 GPU
Memory
1 GB RAM
16 GB internal memory
Up to 32 GB microSD
Camera
Back Camera - 8 MP, LED flash
Front Camera - 2 MP
Network
GSM / CDMA / HSPA / EVDO / LTE
Battery
1780 mAh
130.7 x 68.9 x 7.1 mm
4.3 inches 540 x 960 pixels (256 ppi)
Dual-core 1.2 GHz Cortex-A9
PowerVR SGX540 GPU
Memory
1 GB RAM
16 GB internal memory
Up to 32 GB microSD
Camera
Back Camera - 8 MP, LED flash
Front Camera - 2 MP
Network
GSM / CDMA / HSPA / EVDO / LTE
Battery
1780 mAh
Download K-Touch A11 Stock Firmware
K-TOUCH A11 Specs
Android 2.3.5 Ginger Bread
Dimension - 118 x 62 x 13.5 mm
Display - 3.5 inches
Resolution - 320 x 480 px
Processor - 1 GHz Single Core
RAM - 128MB
ROM - 512MB
Camera - 3MP back and 0.3MP front
Battery - 1400mAh
Android 2.3.5 Ginger Bread
Dimension - 118 x 62 x 13.5 mm
Display - 3.5 inches
Resolution - 320 x 480 px
Processor - 1 GHz Single Core
RAM - 128MB
ROM - 512MB
Dual SIM
Battery - 1400mAh
Download K-Touch A9 Stock Firmware
K-TOUCH A9 Specs
Android 4.2 Jelly Bean
Dimension 118 x 62.5 x 13.5 mm
Display - 3.5 inches
Resolution - 320 x 480 pixels
Processor - 1.3 GHz Dual Core
Camera - 3MP back and 0.3MP front
Battery - 1300mAh
Android 4.2 Jelly Bean
Dimension 118 x 62.5 x 13.5 mm
Display - 3.5 inches
Resolution - 320 x 480 pixels
Processor - 1.3 GHz Dual Core
Dual SIM
GPRS - EDGE – HSPA+
WiFi b, g, n, WiFi hotspot
Blutooth 4.0
USB 2.0
Camera - 3MP back and 0.3MP front
Battery - 1300mAh
Download K-Touch A10 Stock Firmware
K-TOUCH A10 Specs
Android 2.3.5 Ginger bread
Dimension - 113.8 x 62 x 12 mm
Display - 3.5 inches
Resolution - 320 x 480 px
Processor - 1 GHz Dual Core
RAM - 128MB
ROM - 256MB
Camera - 2MP back and 0.3MP front
Battery - 1200mAh
Android 2.3.5 Ginger bread
Dimension - 113.8 x 62 x 12 mm
Display - 3.5 inches
Resolution - 320 x 480 px
Processor - 1 GHz Dual Core
RAM - 128MB
ROM - 256MB
Dual SIM
Battery - 1200mAh
Download K-Touch A11+ Stock Firmware
K-TOUCH A11+ Specs
Android 4.2 Jelly Bean
Dimension - 115.7 x 61.8 x 10.5 mm
Display - 3.5 inches
Resolution - 320 x 480 px
Processor - 1 GHz Dual Core
RAM - 128MB
ROM - 512MB
Camera - 3MP back and 0.3MP front
Battery - 1400mAh
Android 4.2 Jelly Bean
Dimension - 115.7 x 61.8 x 10.5 mm
Display - 3.5 inches
Resolution - 320 x 480 px
Processor - 1 GHz Dual Core
RAM - 128MB
ROM - 512MB
Dual SIM
Battery - 1400mAh
Remove Blackberry 10 Anti Theft Protection Lock
Its no news that the new update of Blackberry 10
OS (10.3.2) comes with an updated security package( Anti-Theft
protection) which is found inside the Blackberry protect app. This feature was made to
take security measures like wipe, block or locate a Blackberry device when flagged as
stolen or missing. When that is done, only the original owner of the phone with the valid
Blackberry ID can setup the device again.
Unfortunately some of us buy used blackberry 10
devices which was originally setup using another blackberry id so after
updating it to version 10.3.2 it ask to enter the Blackberry id which we do not
have or know and thats a huge problem.
This tutorial will be showing you how to
bypass the Anti theft protection. Follow the steps below.
Note:
Romkingz is not responsible for anything you do
using this tutorial
After updating to blackberry OS 10.3.2 you
cannot downgrade to a previous version. But this sweet autoloader of Q10 (Q10_10.3.01.2267_SQN100-1-2-3-4-5)
can downgrade on all Blackberry 10 models with OS version 10.3.2.2639
Download Q10_10.3.01.2267_SQN100-1-2-3-4-5
autoloader from here
Download the original 10.3.2 autoloader for your BB10 device
- Flash/Update your blackberry with its original 10.3.2 autoloader (Assuming its not already on 10.3.2).
- After a successful flash with the original autoloader, Flash/Downgrade it with Q10_10.3.01.2267_SQN100-1-2-3-4-5 autoloader.
- Setup the Blackberry with your new id.
- You can now update the phone back to 10.3.2 and set it up without any anti theft lock protection
If your phone still shows privacy protection lock,
reflash it with Q10.3.01.2267_SQN100-1-2-3-4-5 autoloader or valid developers version of 10.3.1.
The above Q10_10.3.01.2267_SQN100-1-2-3-4-5
autoloader works for all BB10 devices except Z10 STL 100-1 so you will have to
use the developers autoloader of this device to remove privacy protection lock on this phone. Download it
from the list below and follow the guide
above
You can also use the dev autoloaders of other models
to remove anti theft protection on them. Download them also from the list below
and follow the same guide above
Q5 SQR100-1/2/3 (developer v.10.3.1) Download
Z3 STJ100-1/2 (developer v.10.3.1) Download
Z10 STL100-1 (developer v.10.3.1) Download
Z10 STL100-2/3/4 (developer v.10.3.1) Download
Z30 STA100-1/2/3/4/5/6 (developer v.10.3.1) Download
Note that Blackberry might patch this trick soon
Report any broken link
Hope this help
DOWNLOAD INFINIX X570 STOCK ROM
Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
DOWNLOAD INFINIX X600 STOCK ROM/FIRMWARE
Learn how to unbrick/flash this device
using sp flash tool from here
Note
Follow
the instructions on how to flash the device carefully from the link above
I will
not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing
a wrong preloader, will make the device completely dead
(can't
power on, can't charge and will not be detected by a computer)
INFINIX NOTE 2
X600
SPECS
Dimension - 159.5 x
82.5 x 9.3 mm
6.0 -inch Touchscreen, 720 x 1280 pixels
Weight - 194g
1.3 GHz octa-core Processor
MediaTek MT6753
Mali T720-MP3 GPU
2GB RAM
16GB Internal Memory
up to 32GB microSD
13MP Rear Camera, LED Flash, Auto Focus
5MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
WIFI 802.11 b/g/n
bluetooth 4.0
4000mAh Battery
INFINIX
NOTE 2 X600 STOCK ROM
**************************************************************
X600-H533-B1
X600-H533-B1-L-20160120
X600-H533-B1-L-20151104
************************************************************
X600-H532-A1
X600-H532-A1-L-20160120
DOWNLOAD ROM
Like and Share
facebook.com/romkingz
Please Leave a comment after using this ROM
Report if
you cannot download this file.
How to root Samsung Galaxy Note 3
This is a tutorial that will show you how to to gain
root access on Samsung Galaxy Note 3 devices so as to remove bloatwares which take up storage space and RAM, use apps
which require root access, install custom ROMs or whatever you plan to do with the rooted Phone.
Note
You might end up bricking your device if you use the wrong CF Auto Root
Do this at your own risk!
Enable USB debugging on your phone. To do this,
go to Settings > About Phone and tap on Build Number till you see “ you are a developer”
Go back to Settings > Developer Options > Tick
USB Debugging.
Connect
Phone to PC and wait for drivers to install
When drivers
are successfully installed, turn off your Phone
Hold volume down + home + power button
when a warning screen appears, press volume up button to enter odin mode
Download Samsung Galaxy Note 3 SM-N900 USA models
Note
Follow the instructions on how to flash the device carefully from the tutorial below
I will not take responsibility on whatever may happen to your device.
To unbrick/flash or upgrade this device with any of the firmware, use odin
Download an install Samsung USB devers
Put your device into download mode (volume down + home + power button)
Connect device to PC
Download the latest version of odin
Download and extract the firmware
Launch Odin
Click on AP button then navigate to the folder containing the
firmware and select the file
After the file is analyzed, click start button and wait for
process to complete
For a more detail guide including pictures and video, click here
For devices that keep having same problems after
flashing with single file firmware, you will need to use repair firmware for
them. This repair firmware has 4 files inside so you will have to load all of
them in odin to do that follow the procedure below
Boot phone into download mode (Volume down + Home + Power key)
Connect device to PC
Lauch odin
Click BL button then
select file with name starting with BL in firmware folder
Click AP button and
select file with name starting with AP in firmware folder
Click CP button and
select file with name starting with CP in firmware folder
Click CSC button and select
file with name starting with CSC in firmware folder
You can also click PIT
and select PIT file (optional)
When all the files are selected, Click Start button and wait
for flashing process to complete
For a more detail tutorial on how to use repair firmware, click
here
AT&T
Sprint
Android
4.4.4
Android 5.0
T-Mobile
Android
4.4.2
Android 5.0
Verizon
Android 4.4.4
Android 5.0
Download Samsung Galaxy Note 3 SM-N900 Stock Firmware
Follow the instructions on how to flash the device
carefully from the tutorial below
I will not take responsibility on whatever may
happen to your device.
To unbrick/flash or upgrade this device with any of the firmware, use odin
Download an install Samsung USB devers
Put your device into download mode (volume down + home + power button)
Connect device to PC
Download the latest version of odin
Download and extract the firmware
Launch Odin
Click on AP button then navigate to the folder containing the
firmware and select the file
After the file is analyzed, click start button and wait for
process to complete
For a more detail guide including pictures and video, click here
For devices that keep having same problems after
flashing with single file firmware, you will need to use repair firmware for
them. This repair firmware has 4 files inside so you will have to load all of
them in odin to do that follow the procedure below
Boot phone into download mode (Volume down + Home + Power key)
Connect device to PC
Lauch odin
Click BL button then
select file with name starting with BL in firmware folder
Click AP button and
select file with name starting with AP in firmware folder
Click CP button and
select file with name starting with CP in firmware folder
Click CSC button and select
file with name starting with CSC in firmware folder
You can also click PIT
and select PIT file (optional)
When all the files are selected, Click Start button and wait
for flashing process to complete
For a more detail tutorial on how to use repair firmware, click
here
Samsung Galaxy Note 3 SM-N900 Firmwares
India
Android 5.0
Russia
Android
5.0
South
East Asia
Android
4.4.2
Android
5.0
Turkey
Android
4.4.2
Subscribe to:
Posts (Atom)