Wednesday, 20 April 2016

Download Samsung Galaxy Note II SHV-E250K/E250L/E250S Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here
Samsung Galaxy Note II SHV-E250K Stock Firmware
***************************************************************************************

Samsung Galaxy Note II SHV-E250L Stock Firmware
************************************************************************************

Samsung Galaxy Note II SHV-E250S Stock Firmware
 

To flash or upgrade your Galaxy Note II SHV-E250 with the firmware above,
- Download and install samsung drivers
- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process
For a more detailed process on how to flash or upgrade Samsung devices, click here

4 comments:

  1. Hi please how can I update my infinix zero from KitKat to lollipop without PC?
    Build number: j608
    Thanks

    ReplyDelete
    Replies
    1. That's only if you have the update.zip SDcard package which you can use from recovery.
      Else use Check for updates

      Delete
    2. How can I get the update zip

      Delete
  2. Samsung galaxy note and galaxy tabs update firmware..
    http://www.themobileupdates.com/Firmware/

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...