Friday, 15 April 2016

How to flash spreadtrum devices (iTel, M-Horse, Cherry etc) using Miracle Box

This is another tutorial on how to use Miracle Box for newbies. I will be showing you  how to flash/upgrade devices with Spreadtrum Chipset (SPD) using Miracle Box. Watch the video or follow the tutorial below

Note
You must have at least 10% battery life
Do at your own risk!

Watch the video below


Download Miracle Box from here
Download and install SPD drivers from here

Launch Miracle Box
Click on SPD tab
Tick Write
Under Choose type, select the chip of the phone you want to flash
Click the folder Icon, then navigate to the folder containing the pac file of the device you want to flash.
Select the pac file
Click Start Button

Turn off device and connect to PC while holding volume down button
(Some new devices require holding volume up instead)
Miracle Box will detect the device and pop up all partitions to be flashed.
Tick whatever part you want to flash on the device and click OK.
(For full flash, tick everything)

Wait for flashing process to complete
When you see Write Complete, know that flashing process is complete.
Disconnect and reboot device

If you enjoy using this software, buy the box to support developers & also get latest updates




13 comments:

  1. please boss do u have an idea how much the box will cost?

    ReplyDelete
    Replies
    1. what about boot keys for spd phones .....they dont all support the same boot.

      Delete
  2. This is the error message am receiving when I want to read phone code or pattern, none usbport, maybe driver not installed. I have installed every driver tking posted. Please help me I appreciate

    ReplyDelete
  3. This is the error message am receiving when I want to read phone code or pattern, none usbport, maybe driver not installed. I have installed every driver tking posted. Please help me I appreciate

    ReplyDelete
  4. hello, am new to this site , I would like to know how flashed my phone M- HORSE Model : Butterfly 3 and MBO, without the miracle Box

    ReplyDelete
  5. does miracle box support itel java phone ,under spd interface

    ReplyDelete
  6. pls if smaller (java) phones are supported,how do i go about it. i have tried the process i used on my GPG Dragon box (old box) but still no result.pops up with (non SU2Serial port) pls help

    ReplyDelete
    Replies

    1. You need to hold boot key before you connect. Usually the button above call or call end

      Delete
  7. hello boss can u send me a link for m horse butterfly3 flash file

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...