Sunday, 1 May 2016

Download Samsung Galaxy A3 Stock Firmware


Samsung Galaxy A3 Specs

OS
Android 4.4.4 kitkat upgradeable to 5.0.2 lollipop

130.1 x 65.5x 6.9mm in dimension
4.5 inches display
540 x 960px in resolution (245ppi)

Qualcomm MSM8916 Snapdragon 410
Quadcore 1.2GHz
Andreno 306 GPU

MEMORY
16GB internal
1GB or 1.5GB RAM
up to 64GB microSD

8MP Back Camera & 5MP front Camera

GSM/HSPA/LTE Network
***********************************************************************************************

Download Samsung Galaxy A3 Stock Firmware form links below






The firmware above can be flash using Odin


- Download and install samsung drivers


- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process

For a more detailed process on how to flash or upgrade Samsung devices, click here


No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...