DOWNLOAD TECNO J8 STOCK ROM / FIRMWARE

Tecno Spark J8 quick specs & features
Tecno  J8 runs on Android 5.1 lollipop themed with HiOS.

This device is a 5.5-inch ips touchscreen display with a resolution of 720 X 1280 pixels, 267ppi. A size of 153.3 x 76.8 x 7.4 mm and weighs about 182g.

Powered by 1.3GHz quadcore MediaTek MT6735 processor  with Mali-T720MP2 and 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to 128GB with microSD. 

There is a 13MP primary camera with LED Flash and a 5-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM, WCDMA & 4G LTE networks. Sensors on this phone include fingerprint scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 3000Mah non-removable battery




DOWNLOAD TECNO J8 STOCK ROM


J8-H354C1-L-161228V52

J8-H354C1-L-161118V48


How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share

Donate to support this site

16 comments:

  1. what is the problem here i cant download,once i click i moved to another link

    ReplyDelete
  2. camera dont work, and OTA update dont work too

    ReplyDelete
  3. hi bro can tecn j7 be upgraded to lolliop? help please

    ReplyDelete
  4. HI bro I can't download this file

    ReplyDelete
  5. Hellow Not Send sms ! Sending...

    ReplyDelete
  6. hello sir downloaded the file but sp flash tool says , load scatter file is invalid! error: 8417. i gues its corrupted

    ReplyDelete
  7. Hello bro can you help me my tecno j8 doesn't accept any flashing file

    ReplyDelete
  8. after flashing the phone wont switch on

    ReplyDelete
  9. this file cannot be loaded in Flashtool. Gives an error (Image ik checksum failed.)

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...