Download Ulefone Be Touch 3 Stock Firmware


Learn how to unbrick or flash this device using sp flash tool from here
Learn how to unbrick or flash this device using sp multi port download tool from here (recommended)

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD SONY XPERIA Z3 COMPACT D5803 STOCK FIRMWARE


Dimensions - 146 x 72 x 7.3 mm
Weight - 152g

Display - 5.2 inches
Resolution - 1080 x 1920 px (424ppi)

CPU - 2.5GHz Quadcore
GPU - Adreno 330
Chip - Qualcomm MSM8974AC Snapdragon

RAM - 3GB
Internal Memory - 16/32GB
MicroSD - Up to 128GB

Single SIM
GPRS - EDGE - HSPA+ - UMTS - LTE Cat 4

Bluetooth – Version 4.0
WiFi - 802.11a - 802.11b - 802.11g - WiFi Hotspot - WiFi Direct

Primary Camera - 20.7 MP with LED Flash
Secondary Camera - 2.2 MP

Battery - 3100mAH


DOWNLOAD SONY XPERIA Z3 D6603 STOCK FIRMWARE


Dimensions - 146 x 72 x 7.3 mm
Weight - 152g

Display - 5.2 inches
Resolution - 1080 x 1920 px (424ppi)

CPU - 2.5GHz Quadcore
GPU - Adreno 330
Chip - Qualcomm MSM8974AC Snapdragon

RAM - 3GB
Internal Memory - 16/32GB
MicroSD - Up to 128GB

Single SIM
GPRS - EDGE - HSPA+ - UMTS - LTE Cat 4

Bluetooth V 4.0
WiFi - 802.11a - 802.11b - 802.11g - WiFi Hotspot - WiFi Direct

Primary Camera - 20.7 MP with LED Flash
Secondary Camera - 2.2 MP

Battery - 3100mAH


DOWNLOAD SONY XPERIA Z3 DUAL D6633 STOCK FIRMWARE



Dimensions - 146 x 72 x 7.3 mm
Weight - 152g

Display - 5.2 inches
Resolution - 1080 x 1920 px (424ppi)

CPU - 2.5GHz Quadcore
GPU - Adreno 330
Chip - Qualcomm MSM8974AC Snapdragon

RAM - 3GB
Internal Memory - 16GB
MicroSD - Up to 128GB

Dual SIM
GPRS - EDGE - HSPA+ - UMTS - LTE Cat 4

Primary Camera - 20.7 MP with LED Flash
Secondary Camera - 2.2 MP

Battery - 3100mAH




How to get a PC detect and MTK device after flashing wrong ROM/Firmware (Test Point method)

Its never wise to flash the preloader.bin file found inside a ROM folder except we are really sure that the preloader.bin is exactly the one for that device. Since we are humans we are bound to always make mistakes hahahahaha you know were I'm actually getting at. 
If you made a mistake and flash a ROM with a preloader.bin file which is not the one of the device, the preloader partition gets corrupted thus making the device not being detected by the PC, boot or even charge ie Dead Boot. Since it cannot be detected, there is no way you can reflash the phone even when the original ROM of the device is now available.
This post will show you how you can get your PC to be able to recognize the device again if its in such situation. This process to repair dead boots of mtk devices is known as Test Point.

Disclaimer
Romkingz is not responsible for what ever may happen to your device after using this procedure
Do this at your own risk!

First you will have to loose the screws of the phone and take out the board.
Then on the board, you will find golden points with various labels like Tx, Rx, Vcc, KCOLO, COLO, KOLO, GND etc

Now locate a golden point with lable KCOLO or KOLO or COLO on the board. Sometimes these points are found at the volume terminal.
Solder a wire on that point (KCOLO, KOLO or COLO)
Locate the golden point with GND or normal ground on the board.
Join the wire form KCOLO or COLO or KOLO to GND on the board.
After joining this 2 points, connect the device to the PC and see if it detects.
If it doesn't, look for another golden point with same label till your device gets detected by PC.

When your device is detected by PC, it shows as MTK USB COM inside device manager.
Now you will have to quickly flash the original preloader.bin file or complete ROM.
After a successful flash process your device, you can now cut off the wire which you connected.
Couple back the phone & Reboot.

Points to note
Never use the Tx, Rx, Vcc or any other point that carry some amount of voltage

Hope this method works for you

Please if you have a working test point of a device kindly send the images so I can share to help others

Download Autoloaders for blackberry devices

Rather than installing the blackberry OS on your PC, you can use these autoloaders to easily flash/unbrick or upgrade your blackberry devices very fast. These autoloaders are perfect for stubborn devices. Enjoy!!!!!!!!!!


Note
Use this tutorial at your own risk!
Romkingz is not responsible for anything that may happen to your device after using this process


Instructions on how to use these autoloaders

Download the required autoloader of the device you want to flash
Install Blackberry desktop manager so as to have drivers of blackberry devices
Launch the autoloader you downloaded
When you see Connecting to Bootrom: , connect the device you want to flash or upgrade without battery
Do not disturb the usb cable
Wait for the process to complete

For stubborn Blackberry 9900,
*Launch Step1- NUKE_My_Phone then connect blackberry device. When process is completed (process is complete when red light on device goes off)
*Launch Step2-Wipe_My_Phone then connect blackberry device. When process is completed
*Launch the autoloader then connect blackberry device and wait for process to complete.


BLACKBERRY 8520 AUTOLOADER

BLACKBERRY 8900 AUTOLOADER
DOWNLOAD


BLACKBERRY 9000 AUTOLOADER

BLACKBERRY 9220 AUTOLOADER

BLACKBERRY 9300 AUTOLOADER

BLACKBERRY 9330 AUTOLOADER

BLACKBERRY 9530 AUTOLOADER

BLACKBERRY 9630 AUTOLOADER

BLACKBERRY 9650 AUTOLOADER

BLACKBERRY 9670 AUTOLOADER

BLACKBERRY 9700 AUTOLOADER

BLACKBERRY 9780 AUTOLOADER

BLACKBERRY 9790 AUTOLOADER

BLACKBERRY 9800 AUTOLOADER

BLACKBERRY 9810 AUTOLOADER

BLACKBERRY 9850 AUTOLOADER

BLACKBERRY 9860 AUTOLOADER

BLACKBERRY Bold 9900 AUTOLOADER

BLACKBERRY Bold 9930 AUTOLOADER

Download Samsung Galaxy S4 SGH i337 & i337M Stock Firmware


Samsung Galaxy S4 SGH i337 AT&T Firmware
Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

I337UCUAMDB_ATTAMDB  [Android 4.2.2 Jelly Bean]

***************************************************************************************

Samsung Galaxy S4 SGH i337M Canadian Firmwares 

Download Samsung Galaxy Note 2 SGH i317 & SGH i317M Stock Firmware


Samsung Galaxy Note 2 SGH i317 AT&T Firmwares

Flash/unbrick or upgrade your device with the firmwares below using odin

Learn how to use odin from here


AT&T

I317UCALJ2_ATTALJ2 [Android 4.1.1 Jelly Bean]
I317UCAMA4_ATTAMA4 [Android 4.1.1 Jelly Bean]

********************************************************************************************************************************

Samsung Galaxy Note 2 SGH i317M Canada Firmwares 
Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here 

Download Nexus Root Toolkit all versions

Have you always wanted to do more on that Nexus Device like root, unlock or relock bootloader, backup and restore with ease?
here comes Nexus Root Toolkit developed by WugFresh which will help you do all that 
and lots more using your PC with just few clicks of the mouse.


-Root and unroot your device
-Unlock and relock your bootloader
-Flash stock and custom img files
-Flash stock and custom zip files
-Auto detects and download the best & updated files needed to perform that task on the device selected
-Version 2.1.4 has root support for some android 6.0 marshmallow devices.

There are many other functions which you can still discover for your self by hovering the mouse over the button ;)

Download Nexus Root Toolkit v2.0.6 from here
Download Nexus Root Toolkit v2.0.7 from here
Download Nexus Root Toolkit v2.1.0 from here
Download Nexus Root Toolkit v2.1.3 from here
Download Nexus Root Toolkit v2.1.4 from here

How to Root your Nexus Device with this tool,
-Launch Nexus Root Toolkit
-Install your device Drivers
-Enable usb debug mode on your device
-Connect device to PC and wait for Nexus Root Toolkit to detect it
-After the device is detected, you unlock your bootloader
-Now click ROOT (If you will like a custom recovery on your device, tick custom recovery)
-Wait for process to complete

Updating Infinix Hot 2 X510 Android One to Android 6.0 Marshmallow

Infinix Hot 2 X510 Android one (16+2) is now being updated to the new Android 6.0 via OTA but this is not yet available in all regions.  If you will like to have a feel of this new OS on your device follow the method that suits you below


Note
Use this tutorial at your own risk!

How to Flash or Upgrade Spreadtrum devices with PAC or BIN file using GPG Dragon


This tutorial will be showing you how to flash spreadtrum devices using gpg dragon. Research Download or Spd Upgrade Download is good for flashing or upgrading spreadtrum devices but for some reason like the flash file is in BIN format or you are just out to experiment you might want to flash your device using GPG Dragon. Well GPG Dragon has other features which you might be interested in trying.

Note 
Use this tutorial at your own risk!
This tutorial is only for devices with 6820 & 8810 cpu
If you will like to flash devices with new cpu and use many more functions with this tool, buy their box and get an updated version of the software.



>Download an install spreadtrum drivers here for manual installation click here
>Download and extract gpg dragon from here
>Launch GPG Dragon
>Click on Spreadtrum Tab
>Tick WriteFlash
>Under Mobile Option, Select 6280_Android or 8810_Android
>Click the button with 3 dots [...] near C:\Temp_File.bin bar
>Select the pac or bin file you want to flash
>Click Start Button
>You will see Scanning USB Port
>Connect the spreadtrum device you want to flash to PC while holding volume down button
>GPG Dragon will Read the phone info and the pac or bin file info then you will see a message Waiting for your confirmation...
>Tick the partitions you want to flash and select OK (do not untick anything if you want to do full flash)
>You will see a purple progress bar with percentage completed.
>When flashing is complete, you will see a message All Done!
>You can now disconnect the device and reboot.

For those who want to remove pattern lock or Google account but too scared to do a full flash, just tick only UserData and flash
or still you can follow the tutorial here


Download Injoo Fire Pro Stock ROM


Learn how to flash this device using SP Flash Tool from here
Learn how to flash this device using SP MultiPortDownloadTool from here
Learn how to flash this device using WiseLinkTool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download Samsung Galaxy S6 SM-G920W8 Stock Firmwares


Samsung Galaxy S6 SM-G920W8 Firmwares
Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

Canada
Android 5.0.2

Android 5.1.1


For other Samsung firmwares, click here


Need for Speed Most Wanted

Need for Speed Most Wanted is one of the sweetest car racing game on android. Love being chase by the cops, start some trouble by hitting other cars and breaking traffic rules to be the most wanted.
Mind blowing graphics and cool sound tracks.
Race with monster cars like SRT Viper GTS, Porsche 911 Carrera S and many more 
Two types of control system (tilt or touch)
Have fun playing this hit game from EA


How to install
Install the game file
Launch game. When it ask for download game cache, select YES. Stop the download when it reach like 1MB and exit the app.
Now extract the cache file which you downloaded
Open your file explorer then navigate to SDcard/Android/data you will find com.ea.game.nfs…. folder open it and delete all the files found inside.
Now paste the cache file which you extracted inside this folder
Launch game and enjoy

Need for Speed Most Wanted v1.3.68

Need for Speed Most Wanted v1.3.69



Download Samsung Galaxy S6 SM-G920T Stock Firmwares


Samsung Galaxy S6 SM-G920T Firmwares
Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

USA [T-Mobile]
Android 5.0.2

Android 5.1.1

For other Samsung firmwares, click here

Download Samsung Galaxy S6 SM-G920P Stock Firmwares


Samsung Galaxy S6 SM-G920P Firmwares
Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

USA [Sprint]
Android 5.1.1

G920PVPU3BOJ7_SPT3BOJ7

G920PVPU3BOI1_SPT3BOI1

G920PVPU2BOH1_SPT2BOH1

G920PVPU2BOF7_SPT2BOF7



For other Samsung firmwares, click here

How to flash Qualcomm devices using gnqc download tool

This tutorial will show you how to flash Qualcomm android devices with WBWB602, WBW8670, WBW8901 platform using GNQC Download Tool. 

Note.
The screenshots shown here are taken while flashing Gionee E7 which has WBW8901 platform. The process is same if you want to flash devices with the other platforms.
Use this tutorial at your own risk!




Download and extract GNQC Download Tool from here
Install qualcomm usb drivers found inside the GNQC extracted folder
Launch gnqc_download from the extracted folder

Download Stock Firmware/ROM of Elephone Smart Phones


Download Elephone android Smart Phones Stock ROMs (firmwares). 
Flash these ROMs below using SP Flash Tool, MultiportDownloadTool, WiseLinkTool
After Flashing your phone if you get null or invalid imei, use MTK Engineering, Chamelephon or SN Write Tool to repair it

If you encounter any error while flashing your device, click here and see if it solves your problem

ELEPHONE P3000s

ELEPHONE P6000

ELEPHONE P6000 PRO

ELEPHONE M1

ELEPHONE M2

Related Posts

Related Posts Plugin for WordPress, Blogger...