Download Ulefone Vienna Stock Firmware


Learn how to unbrick or flash this device using sp flash tool from here
Learn how to unbrick or flash this device using sp multi port download tool from here (recommended)

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download Ulefone Paris X Stock Firmware


Learn how to unbrick or flash this device using sp flash tool from here
Learn how to unbrick or flash this device using sp multi port download tool from here (recommended)

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download Ulefone Power Stock Firmware


Learn how to unbrick or flash this device using sp flash tool from here
Learn how to unbrick or flash this device using sp multi port download tool from here (recommended)

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD HDC STOCK FIRMWARE




Learn how to unbrick/flash any this device using sp flash tool from here



Note

Follow the instructions on how to flash the device carefully from the link above

I will not take responsibility on whatever may happen to your device.


Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)



Most HDC devices are clones of other devices.

So there might be different variants of same phone.

Make sure the ROM you are flashing matches the phone you want to flash else you will end up with a dead phone. So it’s always wise to do a stock backup of the current firmware of the device you want to flash so that if anything go wrong you can revert back.



DOWNLOAD HDC STOCK FIRMWARE BELOW



HDC GALAXY A9100

A9100_MT6573_Android2.3

SIZE: 153 MB


****************************************************************

HDC NOTE 3 GT-N9000

GT-N9000_MT6572_Android4.2

SIZE: 357 MB


****************************************************************

HDC GALAXY NOTE 3 N9006

HDC_N9006_MT6582_Android4.4

SIZE: 532 MB




HDC_N9006_V08_MT6582_Android4.4

SIZE: 573 MB




****************************************************************

HDC NOTE 3 SM-N9006

HDC_SM-N9100_JA3G_4.2.2_ALPS.JB3.MP.V1

MT6572_Android4.2

SIZE: 538 MB


****************************************************************

HDC NOTE 3 SM-N900

HDC_N900_MT6589_Android4.3

SIZE: 493 MB


****************************************************************

HDC NOTE 3 9006-SM1327

HDC_9006-SM1327_MT6572_Android4.3

SIZE: 329 MB


****************************************************************

HDC NOTE 3 MINI

HDC_NOTE3_MINI_MT6582_Android4.2

SIZE: 435 MB


****************************************************************

HDC NOTE 3 VITAS

HDC_NOTE3_VISTAS_MT6592_Android4.2

SIZE: 413 MB


****************************************************************

HDC ONE M8 OV8865

HDC_ONE_M8_OV8865_MT6582_Android4.4

SIZE: 422 MB


****************************************************************

HDC ONE X S720e

HDC_ONE_X_S720e_MT6575_Android4.0

SIZE: 213 MB


****************************************************************

HDC S4 LEGEND

HDC_ONE_X_S720e_MT6589_Android4.2

SIZE: 459 MB


****************************************************************

 HDC S4 MEGA GT-i9200

HDC_S4_MEGA_GT-i9200_MT6592_Android4.2

SIZE: 444 MB


****************************************************************

HDC S4 SM-G900S

HDC_S4_SM-G900S_4.2.2-S105-NLF-V04

MT6582_Android4.2

SIZE: 635 MB


****************************************************************

HDC S5 H900

HDC_S5_H900_MT6592_Android4.4

SIZE: 475 MB


****************************************************************

HDC S5 SM-G900F GOLD

HDC_S5_SM-G900F_MT6582_Android4.2

SIZE: 545 MB


****************************************************************

HDC S5 SM-G900

HDC_S5_SM-G900_MT6572-4.4-I7228_W1.A.A-V0.1.3B0729

Android 4.4

SIZE: 494 MB


****************************************************************

HDC S5 SM-G900F LEGEND

HDC_S5_SM-G900F_MT6592_Android4.2

SIZE: 695 MB


****************************************************************

 HDC S5 SM-G900T

HDC_S5_SM-G900T_MT6582_Android4.2

SIZE: 665 MB


****************************************************************


SPD UPGRADE TOOL & RESEARCH DOWNLOAD (SPREADTRUM FLASH TOOL)


With SPD Upgrade Tool,
You can easily flash firmware, upgrade firmware, remove pattern lock & google account, many other options like adding multiple languages and configuring LCD.

Download Links

This tool allows you to flash .PAC & .P5C firmwares on Spreadtrum devices like itel
If you want to flash any spreadtrum device with this tool, follow the procedures below.

Download and install spreadtrum drivers from here
Download and extract SPD Upgrade Tool or Research Download.
Inside the extracted file launch UpgradeDownload or Research Download
 Click load packet icon.
Select the .PAC file of the spreadtrum device you want to flash or upgrade.
Click on settings icon
Uncheck all box in calibration tab.
Tick erase all flash in flash operation tab (optional).
Close settings.
Click play or Download button.
Hold volume down button & connect the device to the computer. 
When the blue progress bar is seen, release the volume button.
Process is complete when the word PASSED in green colour is seen.

DOWNLOAD BLUEBO STOCK FIRMWARE



Learn how to unbrick/flash this device using sp flash tool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download Gfive Smart Phone Stock Firmware



Learn how to unbrick/flash this device using sp flash tool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download Cubot Stock Firmware



Learn how to unbrick/flash this device using sp flash tool from here


Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer) 

How to create custom boot logo on MTK devices


This is just another tutorial on how to create a custom boot logo like the one in the image above for MTK devices using WiseLink Tool. Its easy and straight forward. Just watch the video or follow the tutorial below.


Note
Do this at your own risk!



Requirements
Must have installed MT65xx drivers
Download and install WiseLink Tool from here [password: wiselink]
Stock ROM of the phone you want to flash
NB: You can also extract logo.bin from devce using Miracle Box or MTK Droid Tools
Design the image you will want to be the new logo of your device
SP Flash Tool to flash the new logo.bin created

Launch WiseLinkTool
Click on Custom tab
Click LOGO button
Navigate to the Stock ROM folder and select logo.bin file
After a few seconds, the stock logo will be loaded.

Now click on Replace Boot Logo button and select the custom image you designed
Again click on Replace Android Logo and select the custom image you design

After replacing the image for both Boot Logo and Android Logo,
Click on Save LOGO button
Select path and click save button.

You have now succeeded in creating a logo.bin file
To flash this new logo.bin file to the device,
Copy the newly created to the stock rom folder (replace old one)
Launch SP Flash Tool or WiseLinkTool
Click on Scatter Loader
Select Scatter file
Tick ONLY LOGO
Click Download button
Connect device and wait for flash process to complete (takes about 2 secs)
Reboot your phone

Enjoy!

Download Samsung Galaxy Pocket 2 SM-G110B, G110H & G110M Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

Samsung Galaxy Pocket 2 Stock Firmware

How to install XUI 1.N.0.2 on infinix X510 (Hot 2)


The android 6.0 marshmallow update on this device is not that cool I know a lot of people will agree with me on that. But infinix XUI interface which is found on infinix hot note and note 2 is really cool with lots of features. No surprise why it was ported to this device and yea I really like it an I'm sure you will too. Here is the tutorial on how to install this ROM and have this cool interface and features on your infinix X510 (Hot 2).

Points to Note
* This is a custom ROM.

* This works fine for both 1GB & 2GB version
* You might find some bugs even though I've not found one yet :)
* I discovered that if your device running on Android 6.0, after installing this ROM it will hang on infinix logo, So downgrade the phone first to Android 5.1 first before doing this.
* Again do this at your own risk!


This tutorial is a three part tutorial.
1- Downloading the files for flashing
2- Preparing the phone for flashing
3- Flashing the phone with the XUI ROM

Poem: The Death of Simple Server


The poor masses spluttered around,

Like vines without a support.

They surveyed the fallen iroko,

As a poor lonely child would survey a dead parent.

This iroko it was,

Who was bold enough to nib the festering sore of the mighty.

As a hen will feed her chicks,

He offered them hope and respite.

Because of him they were able,

To drink from the pool of relief.

But while they reviled in bliss,

The mighty plotted as always,

And cut the iroko in his prime.

Oh! How Nigerians will always remember the days of SAS





Did you enjoy Simple Server? Share your best moments while using it
Poem Written by Chimeremeze David
for www.romkingz.net


Poem lovers you can contact him using
+2347082171141
                       

DOWNLOAD INNJOO MAX 2 & MAX 2 PLUS STOCK ROM


Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD INNJOO FIRE 2 STOCK ROM


Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD INJOO TWO STOCK ROM


Learn how to flash this device using SP Flash Tool from here
Learn how to flash this device using SP MultiPortDownloadTool from here
Learn how to flash this device using WiseLinkTool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download Samsung Galaxy A3 SM-A300Y & SM-A300YZ Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

Download Samsung Galaxy A3 SM-A300M Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

Samsung Galaxy A3 SM-A300M Stock Firmware

Download Samsung Galaxy A3 SM-A300H Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

How to flash Samsung devices using Repair Fimware (firmware with many files)

I've been receiving lots of messages from people asking how to use samsung 4 files repair firmware or how to flash some old samsung smart phones which have multiple files inside the firmware folder. For those who don't know, sometimes flashing a samsung device using the regular single tar.md5 file don't work in such cases, you will need to use repair firmware to flash the device.

After downloading and extracting a repair firmware, you will notice that there are either 3 or more archive files found inside.
This names of this archive files (.tar or .tar.md5) will have the following string of words BOOT, MODEM, PHONE, CSC and sometimes a .PIT file is found inside too.

So now for you to flash your device with this kind of firmware,

Put your device into download mode using samsung 300k tool or pressing volume down + home + power button for about 3 secs then volume up button when you see the warning sign.


Launch odin
- Connect samsung device to PC with usb cord
- Odin will detect device and show Added! under message tab.

Now to select the files accordingly.
- Click PIT button in odin and select PIT file (that's if there is a PIT file inside the extracted folder) after selecting PIT file make sure you click Repartition.

- Click BOOTLOADER and select the file with BOOT inside the firmware folder
- Click on PHONE button and select file with MODEM or PHONE
- Click on CSC button and select file with CSC
- Click on PDA and select the last file with none of the names above.

- Now click Start



Wait for the flashing process to complete
When you see PASS! in green, the process is complete.




Wait for samsung device to reboot



Download Samsung Galaxy A3 Stock Firmware


Samsung Galaxy A3 Specs

OS
Android 4.4.4 kitkat upgradeable to 5.0.2 lollipop

130.1 x 65.5x 6.9mm in dimension
4.5 inches display
540 x 960px in resolution (245ppi)

Qualcomm MSM8916 Snapdragon 410
Quadcore 1.2GHz
Andreno 306 GPU

MEMORY
16GB internal
1GB or 1.5GB RAM
up to 64GB microSD

8MP Back Camera & 5MP front Camera

GSM/HSPA/LTE Network
***********************************************************************************************

Download Samsung Galaxy A3 Stock Firmware form links below






The firmware above can be flash using Odin


- Download and install samsung drivers


- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process

For a more detailed process on how to flash or upgrade Samsung devices, click here


Related Posts

Related Posts Plugin for WordPress, Blogger...