How to hard reset Huawei MediaPad 7 Lite S7-931u

Hard reset also known as factory reset or master reset will restore your device to its factory state ie clean passwords, contacts, apps, pictures etc. 
The following procedure below will show you how to hard reset the old Huawei MediaPad 7 Lite running on android 4.0.4 ice cream sandwich.


Note
Battery must be at least 15% before you try this
This process will erase all your files
Do at your own risk!


Turn off the device.

Hold Volume up + Volume down + Power button.

Let go Power button when you see Huawei Boot Logo.

Then when you see the green android man with gear wheels spinning, release volume up key and keep holding volume down key.

After few second, a yellow progress bar will appear below the gear wheel.

You can now let go the volume down button.

Wait for process to complete.

when process is complete, tab will reboot.

You can now set it up as new.

Download Samsung Galaxy Grand Prime Clone SM-G530H Stock ROM/Firmware


Firmwares (Stock ROMs) for restoring bricked Samsung SM-G530H Clone (Copy) phones.
Flash this device using SP Flash Tool, WiseLinkTool, Miracle Box etc

 This clone devices do have many variants so do not tick preloader & uboot  when using any of these firmwares (Except when the phone is totally dead)

NOTE
It always good to make a full stock backup of the phone (from preloader to Android) before flashing any of the Stock ROMs so if you end up with a dead phone the full backup you made to restore the phone as it was before flash to avoid problems.

If you get the No Space Error while trying to flash the phone, use miracle box or any other flashing box

DOWNLOAD STOCK ROM OF ATTILA ANDROID SMART PHONES

Download the Stock ROM of Attila android smart phones from the list below

ATTILA P8
SPD SC8825
Use ResearchDownload to flash this PAC file

ATTILA P8 Plus
MediaTek MT6572
Learn how to flash this device with SP Flash Tool here
If you have display problems after flashing this ROM use this display fix here

ATTILA R1
MediaTek MT6572
Learn how to flash this device with SP Flash Tool here

ATTILA V10
MediaTek MT6572
Learn how to flash this device with SP Flash Tool here

ATTILA Z3
MediaTek MT6572
Learn how to flash this device with SP Flash Tool here

DOWNLOAD OUKITEL U7 PRO STOCK FIRMWARE


Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using WiseLink Tool from here 

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD OUKITEL U8 STOCK FIRMWARE

Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using WiseLink Tool from here 

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD OUKITEL U2 STOCK FIRMWARE

Learn how to unbrick/flash this device using SP Flash Tool from here
Learn how to flash this device using WiseLink Tool from here 

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD OUKITEL K4000 PRO STOCK FIRMWARE


Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using WiseLink Tool from here 

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to unbrick dead Infinix Note 2 X600 after flashing wrong ROM/Firmware (Test Point)

Lots of people do get confused when trying to flash or upgrade infinix note 2 X600 because of the many variants of ROMs/firmware they are faced with so most times they end up flashing the wrong one. Once this happens, if you are lucky the device will still be able to be detected by PC which in that case you will be able to flash another ROM.

If you noticed that PC can no longer detect the Infinix Note 2 X600 you are trying to flash or upgrade, you will need to use the test point method to make PC able to detect the device again.

On a normal, the test points of most MTK devices is usually joining the two gold points with label KCOLO (KOLO, COLO) & GND you can read more of this from here. There is no KCOLO gold point on  Infinix Hot 2 X600 board so the method from the link above will not work on this device.

Now to get the infinix X600 detected, you will have to do the following below.

How to remove factory reset protection (Google Account lock) on spreadtrum devices like itel


Factory Reset protection is the new security google added to android lollipop. When you reset the device from recovery menu, FRP switch is tripped which will ask the user to input the Google account that was previously used on the device. Even though this was made for security reasons, we sometimes forget the account details that was on the device before reset so stuck on input Google account details.
The following tutorial below will show you how you can remove FRP on Spreadtrum devices like iTel which have included this security on their new devices.

Note
Make sure device have at least 30% battery life
Do this at your own risk

Follow the screenshots or read the tutorial below

DOWNLOAD ITEL IT1507 STOCK ROM / FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device

For a more detail tutorial with video and pictures click here

You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices



ITEL 1507 QUICK SPECS 

Android 5.1 (Lollipop)

Dimensions - 144 x 72.5 x 8.5 mm
5.0-inch Touchscreen, 480 x 854 

1.2GHz quad core
SC7731

512 MB RAM
8GB Internal Memory 
Supports up to 32GB microSD

8 MP Rear Camera, LED Flash,
2 MP Front Camera

Dual SIM
GPRS/EDGE/HSPA+
WIFI 802.11 b/g/n
bluetooth 4.0

2100mAh Battery

ITEL 1507 STOCK ROM

IT1507-W503-IN-20161128
DOWNLOAD ROM

IT1507-W503-IN-20161108
DOWNLOAD ROM


IT1507-W503-20160910
DOWNLOAD ROM

IT1507-W503-20160628
DOWNLOAD ROM


IT1507-W503-IN-20160628
DOWNLOAD ROM

 Learn how to easily download files from Mega

PC or Mobile

Please Leave a comment after using this ROM
Report if you cannot download this file.


DOWNLOAD OUKITEL K6000 STOCK FIRMWARE


Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using WiseLink Tool from here 

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD HTC DESIRE 616 & 616H STOCK FIRMWARE


HTC Desire 616 quick specs



Dimension
142 x 71.9 x 9.2 mm
Display
5 inches 720 x 1280 pixels (294 ppi)
Weight
150g

DOWNLOAD IPHONE CLONE STOCK ROM/FIRMWARE


Flash any of the iPhone clone ROMs using sp flash toolWiseLink tool, Miracle Box etc

Points to Note before flashing

All userdata like apps, media files, contacts, sms etc will be wiped after flashing the device.

These iPhones are clones (fake) there can be many variants of a particular device so do not flash preloader file unless its really necessary.

It’s a good practice to make a stock back up of the current ROM that’s on the phone before you flash them with any new ROM so that if anything goes wrong, you can restore back the one you made.

Flash at your own risk!

Download Alcatel One Touch Pop C7 Stock Firmware

Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using SP MultiPortDownloadTool from here 

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD HTC DESIRE 320 STOCK FIRMWARE


HTC Desire 320 quick specs


Dimension
132 x 67.8 x 10.5 mm
Display
4.5 inches 480 x 800 pixels (218 ppi)Weight
145g

Guest Post: Top 10 Custom ROMs For Android Devices

This is a guest post by Prince Onuoha owner of luvmp.com
You can visit his site for more questions, tips and tricks about this topic

Want to feature a post on this blog contact me via email info[at]romkingz.net

Android is truly an open source platform in other words developers can tinker with all the underlying code and
that brings the ability to create custom Android builds, generally known as Custom ROMs. A custom ROM
is an upgraded software version for your Android device that allows users to change every element of the Android
interface along with giving you control over everything.


Two reasons why a custom ROM is used.

The first one is that you want to remove all that bloatware that comes already installed in your phone.

The second is that you want to do some real customization with your device. Adding splendid themes,
overclocking, improving battery life, downloading apps to SD card and making your device’s speed better
are some of the exceptional tasks that a custom ROM performs. A custom ROM features its own kernel.

Note: Installing a custom ROM requires you to root a device, which voids the warranty on most smartphones
and if things go wrong, It may turn your phone into a brick if something goes wrong.

DOWNLOAD HTC DESIRE 310 & 310W STOCK FIRMWARE


HTC Desire 310 quick specs

Dimension
132.4 x 68 x 11.3 mm
Display
4.5 inches 480 x 800 pixels (218 ppi)Weight
140g

Download HTC Desire 210 Stock Firmware


HTC Desire 210 Dual SIM quick specs

Dimension
127.7 x 65 x 10.5 mm
Display
4.0inches 480 x 800 pixels (233 ppi)Weight
130g

DOWNLOAD OUKITEL STOCK ROM/FIRMWARE

Download OUKITEL android smart phones Stock ROMs (firmwares). 

Learn how to use SP Flash Tool to flash/unbrick & upgrade tecno devices from here

Learn how to use WiseLinkTool to flash/unbrick & upgrade tecno devices from here

Learn how to use SP MultiPortDownload to flash/unbrick & upgrade tecno devices from here



If you encounter any error while flashing your device, click here and see if it solves your problem

Download Okitel Stock ROMs from list below






HOW TO FLASH/UNBRICK OR UPGRADE LG ANDROID DEVICES






Experimenting on your LG android smart phone with custom roms, apps, root etc is always enjoyable. But sometimes things can go wrong and the device will no longer be able to boot up. In this situation, the only way for you is to flash the Stock ROM/Firmware of the device. This can be done using LG Flash Tool. 
This process can also be used if you want to upgrade or downgrade your device to any official android version of the device released by LG.


Download the stock rom (firmware) of the LG device you want to flash/unbrick or update/downgrade. They are normally in kdz format.
Download and install LG drivers from here.
Download and extract LG Flash Tool from here.
Copy KDZ file from ROM (firmware) folder into LG Flash Tool Folder.
Make sure at least 25% of battery life is available on the device.
Boot the device into download mode by holding volume down button or volume up button then connect device to PC with usb.



Launch LGFlashTool2014 as administrator (If it cannot start, download and install visual c++ runtime).


  • Select Type - CDMA
  • Phone Mode - DIAG
  • Select KDZ File (Choose the KDZ file inside the LG FLash Tool folder)


Click Normal for flashing the device without loosing any data.
Click CSE Flash to do a full flash of the device. Use this when upgrading, downgrading or unbricking the device.


Click START.
A dialogue box will appear for you to select language. Click OK.
Now Wait for the process to reach 100%
First boot after flash will take a while......

How to use Qualcomm Flash Image Loader (QFIL) to unbrick Qualcomm devices



QFIL is used in flashing factory build images of QUALCOMM devices (especially Lenovo qualcomm devices). It actually targets these devices when they are connected to PC in Emergency mode (EDL) or Normal Boot up mode (HLOS).
This guide is to show you how you can use QFIL to flash devices in emergency mode ie when the phone is bricked or OS is corrupted.


Watch the video or follow tutorial below


How to install QFIL
QFIL is found in QPST v2.7.416 and above installer package. So after installing QPST on your PC you will have QFIL.
Download QPST 2.27.420 from here or other new versions here
Extract an install it

DOWNLOAD ITEL IT1551 STOCK ROM / FIRMWARE

Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device

For a more detail tutorial with video and pictures click here


You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices




ITEL 1551 QUICK SPECS 

Android 5.1 (Lollipop)

Dimensions - 156 x 80 x 9.4 mm
5.5-inch Touchscreen, 480 x 854 

1.2GHz quad core
SC7731

512 MB RAM
8GB Internal Memory 
Supports up to 32GB microSD

5 MP Rear Camera, LED Flash,
2 MP Front Camera

Dual SIM
GPRS/EDGE/HSPA+
WIFI 802.11 b/g/n
bluetooth 4.0

2400mAh Battery

ITEL 1551 STOCK ROM
IT1551-W503-20160902
DOWNLOAD ROM


IT1551-W503-20160628
DOWNLOAD ROM
******************************************************
IT1551-W504-20160427


Please Leave a comment after using this ROM

Report if you cannot download this file.

Related Posts

Related Posts Plugin for WordPress, Blogger...