DOWNLOAD TECNO S3+ STOCK ROM

Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

Ulefone just released the kernel code for Ulefone Future


Its always very hard to get the kernel code of most MTK devices so if you want to do custom ROMs for that device its a little bit difficult to get everything working properly. Finally Ulefone stepped up and released the android 6.0 kernel code officially for its bezel-less powerful device Ulefone Future thus encouraging developers to customize the device. 
If you are a developer who likes to create custom ROMs for devices, I will advice you to put in more of your effort to create a sweet and smooth custom ROM for this device because Ulefone is ready to do a long term partnership with you if your custom ROM has good review among users of this device. 

You can download the source code from Google Drive
You can also customize this code directly from Github

If you discover any bug or figure out any new stuff about the code, you can share it on the Ulefone forum

Developers start dancing shakitibobo your efforts might no go to waste this time arround

DOWNLOAD INFINIX HOT 4 X557 STOCK ROM/FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
If you encounter any error while flashing your device, click here and see if it solves your problem

INFINIX X557 QUICK SPECS
Dimension - 152.6 x 76.2 x 8.8 mm
5.5 - inch Touchscreen, 720 x 1080 pixels
Weight - 194g

1.3 GHz quad-core Processor
MediaTek MT6580
Mali 400-MP2 GPU

2GB RAM
16GB Internal Memory 

up to 32GB microSD
8MP Rear Camera, LED Flash, Auto Focus
5MP Front Camera 

Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
WIFI 802.11 b/g/n
bluetooth 4.0

4000mAh Battery


INFINIX X557 STOCK ROM


X557 ANDROID 7 NOUGAT FIRMWARE

X557-H807AD-N-170512V44
DOWNLOAD ROM

X557-H807A1D1-N-170503V32
DOWNLOAD ROM

X557-H807A1D1-N-170426V18
DOWNLOAD ROM

***********************************************************

X557 ANDROID 6.0 MARSHMALLOW FIRMWARE

X557-H807AD-M-170524V251
DOWNLOAD ROM

X557-H807A1-D1-M-170110V194

X557-H807A1-D1-M-161209V185
DOWNLOAD ROM

X557-H807-A1-M-160902V81

X557-H807-A1-M-160815V57
DOWNLOAD ROM

=========================================

X557-H807BE-M-170524V173
DOWNLOAD ROM

X557-H807B1-E1-M-170110V151

X557-H807B1-E1-M-161213V147

X557-H807-B1-M-160902V68

 Learn how to easily download files from Mega
PC or Mobile

Report if you cannot download any of these files.
Donate to support this site

Download Ulefone Metal Stock Firmware


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash Ulefone devices using SP Flash Tool

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there is no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

Download Ulefone Future Stock Firmware

Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)



How to flash Ulefone devices using SP Flash Tool

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there is no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

Download Ulefone U007 Stock Firmware


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)


How to flash Ulefone devices using SP Flash Tool

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there is no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

DOWNLOAD K-TOUCH A35 STOCK FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

K-TOUCH A35 STOCK FIRMWARE
K-TOUCH_A35_V0002

DOWNLOAD K-TOUCH W68 STOCK FIRMWARE

Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

K-TOUCH W68 STOCK FIRMWARE
K-TOUCH_W68_21663_5.2.7.06

DOWNLOAD K-TOUCH A14 STOCK FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

K-TOUCH A14 STOCK FIRMWARE
K-TOUCH_A14_JB3_20140320

DOWNLOAD K-TOUCH A10 PRO STOCK FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

K-TOUCH A10 PRO STOCK FIRMWARE
K-TOUCH_A10_PRO_20140320

How to remove/bypass frp (google accout lock) on Samsung devices with 2016 security patch


Factory Reset protection is the new security google added to android lollipop. When you reset the device from recovery menu, FRP switch is tripped then when you boot up the device, you will be asked to input the Google account that was previously used on the device before factory reset.
Even though this was made for security reasons, we sometimes forget the account details that was on the device before reset so stuck on input Google account details.

I have done some tutorial before on how to remove frp on some spd and mtk devices if that's what you are looking for then you can check it out here.
If you are looking for how to remove frp on some Huawei devices, follow the procedure here

Lot of peeps have been asking me to do tutorial on how to do this stuff on Samsung devices since the above methods will not work on them. At first I thought its old stuff since its all over the internet but later I said to my self why not just do the tutorial for the RomKingz visitors.
So if you have been looking for how to easily remove frp on Samsung devices, follow the procedures below.

DOWNLOAD K-TOUCH A17 STOCK FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

K-TOUCH A17 STOCK FIRMWARE
K-TOUCH_A17_V006

DOWNLOAD K-TOUCH A30 STOCK FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

K-TOUCH A30 STOCK FIRMWARE
K-TOUCH_A30_V0004

DOWNLOAD SAMSUNG GALAXY NOTE 10.1 GT-8020 STOCK FIRMWARE

Note
Follow the instructions on how to flash the device carefully from the tutorial below
I will not take responsibility on whatever may happen to your device.

To unbrick/flash or upgrade this device with any of the firmware, use odin
Download an install Samsung USB drivers
Put your device into download mode (volume down + home +  power button)
Connect device to PC
Download the latest version of odin
Download and extract the firmware
Launch Odin
Click on AP button then navigate to the folder containing the firmware and select the file
After the file is analyzed, click start button and wait for process to complete

For a more detail guide including pictures and video, click here

DOWNLOAD SAMSUNG GALAXY NOTE 10.1 GT-N8010 & GT-N8013 FIRMWARE



Note

Follow the instructions on how to flash the device carefully from the tutorial below
I will not take responsibility on whatever may happen to your device.

To unbrick/flash or upgrade this device with any of the firmware, use odin
Download an install Samsung USB drivers
Put your device into download mode (volume down + home +  power button)
Connect device to PC
Download the latest version of odin
Download and extract the firmware
Launch Odin
Click on AP button then navigate to the folder containing the firmware and select the file
After the file is analyzed, click start button and wait for process to complete

For a more detail guide including pictures and video, click here

Download Samsung Galaxy Note 8.0 N5110 & N5120 Stock Firmware


Note

Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Download Samsung Galaxy Note 8.0 N5100 & N5105 Stock Firmware


Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

DOWNLOAD INFINIX SURF X511 STOCK ROM


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

 Download an install SPD drivers from here

Download the latest version of Research Download or UpgradeDownload from here

Extract and Launch Research Download/UpgradeDownload Tool

Click on load icon

Navigate to the folder containing the firmware

Select the pac file in the firmware folder

Wait for it to load in Research Download/UpgradeDownload tool

Click Play/Start button

Now connect the device to PC while holding volume down key

(Some new devices requires holding volume up key)

Wait for flashing process to complete

When you see Passed! Then note that the flashing or upgrading process is complete

Disconnect and boot up device

For a more detail tutorial of this process with video and pictures click here


You can also use tools like MiracleBox, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices


INFINIX SURF X511 QUICK SPECS

5.0" WVGA Touchscreen, 480 x 854 pixels
145 x 73.2 x 10.1 mm

Android 5.1 Lollipop

ARM Mali 400 Quad core with 1.2GHz Processor
SC7731

 1GB RAM
8GB Internal Memory 
up to 32GB microSD

5MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera 

Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WIFI 802.11 b/g/n
bluetooth 2.1

 36000mAh Battery


 INFINIX X511 STOCK ROM
X511_W501_L_FR_20160612

Learn how to easily download files from Mega

Report if you cannot download any of these files.
Donate to support this site

Download M-Horse S51 Stock ROM/Firmware


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)

How to remove/bypass frp (google accout lock) on Huawei devices 2016 security patch


Factory Reset protection is the new security google added to android lollipop. When you reset the device from recovery menu, FRP switch is tripped then when you boot up the device, you will be asked to input the Google account that was previously used on the device before factory reset.
Even though this was made for security reasons, we sometimes forget the account details that was on the device before reset so stuck on input Google account details.

I have done some tutorial before on how to remove frp on some spd and mtk devices if that's what you are looking for then you can check it out here.

DOWNLOAD INFINIX NOTE 3 X601 STOCK ROM / FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD K-TOUCH A15 STOCK FIRMWARE



Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)



K-TOUCH A15 STOCK FIRMWARE
K-TOUCH_A15_20130709

DOWNLOAD K-TOUCH A17 3G VERSION STOCK FIRMWARE


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)

K-TOUCH A17 3G STOCK FIRMWARE
K-TOUCH_A17_3G_V007

Related Posts

Related Posts Plugin for WordPress, Blogger...