Download Xiaomi Redmi Note 3 MTK Stock Rom/Firmware

Redmi Note 3 MTK Quick Review

This phone comes with a 5.5-inch touchscreen display with a resolution of 1080 X 1920 pixels with ~403ppi. A size of 150 x 76 x 8.7 mm and weighs about 164g.

Powered by 2.0GHz octa-core processor MediaTek MT6795 Helio X10 with PowerVR G6200 GPU. THere are two variants of this device 16GB internal storage with 2 GB RAM and 32GB internal storage with 3GB RAM. No SDcard slot. Redmi Note 3 runs on Android 5.0.2 Lollipop with MIUI 7.0.

There is a 13-megapixel primary camera with LED Flash and a 5-megapixel front selfie camera.

This is a single SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth and USB OTG. Supports 2G, 3G and 4G networks. Sensors on this phone include Finger print, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 4000Mah non-removable battery
DOWNLOAD REDMI NOTE 3 STOCK ROM/FIRMWARE
hennessy_images_7.3.23_20170323.0000.00_5.0_cn
How to flash Redmi Note 3 using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Extract the Stock ROM downloaded above using winrar or 7zip 
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Navigate and select the scatter file inside the stock ROM folder

Select either Download only, Firmware Upgrade or Format + Download from drop down menu

Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share

Donate to support this site

No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...