Friday, 30 June 2017

DOWNLOAD KIMFLY M10 STOCK FIRMWARE

Kimfly M10 Quick Review

This phone comes with a 5-inch touchscreen display with a resolution of 480 X 800 pixels with ~196ppi. A size of 131 x 68.1 x 10.8 mm and weighs about 200g.

Powered by 1.0GHz -core Spreadtrum Processor and 512MB of RAM there’s also 4GB ROM which can be expanded up to 32GB with microSD. 

There is a 2-megapixel primary camera with LED Flash and a 0.3-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth, Micro USB 2.0 also supports only 2G & 3G network. Sensors on this phone include Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope. 
Powered by a 2800Mah removable battery


DOWNLOAD KIMFLY M10 STOCK ROM

S16_A_BP251_CYS_V1.4_20170503
DOWNLOAD ROM

S16_A_BP251_SWH_V1.4_20170502
DOWNLOAD ROM

S16_A_BP251_LX_V1.3_20170414
DOWNLOAD ROM

S16_A_BP251_MJLHZ_V1.3_20170418
DOWNLOAD ROM

Learn how to easily download files from Mega
PC or Mobile


How to flash/upgrade this device 
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)

Download and install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the .pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices require holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device

For a more detail tutorial of this process with video and pictures click here
You can also use tools like MiracleBox, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

Like and Share

Donate to support this site

No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...