Thursday, 14 September 2017

DOWNLOAD INFINIX S2 PRO X522 STOCK ROM / FIRMWARE

Infinix S2 Pro X522 Quick Review

Infinix S2 runs on Android 6.0 Marshmallow upgraded to Android 7.1 Naugat with XOS Chamelon.

This device is a 5.2-inch ips touchscreen display with a resolution of 720 X 1280 pixels with ~294ppi. A size of 141.7 x 72.1 x 8.7 mm and weighs about 147g.

Powered by 1.3GHz octa-core processor MediaTek MT6753 and 2GB/3GB of RAM there’s also 16GB/32GB of internal storage which can be expanded up to 128GB with microSD. 

There is a 13-megapixel + OV 8MP Dual primary camera with LED Flash and a 13-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports 2G, 3G and 4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 3000Mah non-removable battery

DOWNLOAD INFINIX S2 PRO X522 STOCK ROM

X522-H539A1-N-170522V106
DOWNLOAD ROM

X522-H539A1-N-ID-170413V2
****************************************


X522-H539C1-N-1700522V102
DOWNLOAD ROM


X522-H539C1-N-170411V62
DOWNLOAD ROM

X522-H539C1-N-ID-170413V2
****************************************

X522-H539D1-N-170412V63




How to flash infinix s2 using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share

Donate to support this site

No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...