DOWNLOAD LYF WATER 1 LS-5002 STOCK ROM / FIRMWARE



Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)


How to flash this devices using Qualcomm Flash Image Loader (QFIL)
Download an install the latest version of QPST from here
Download an install Qualcomm usb drivers from here
To launch QFIL, navigate to 
C:\Program Files\Qualcomm\QPST\bin)
Now connect your lyf device to PC while holding both vol up & down button
Device will be detected and you will see 
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml  file and then patch xml file
Click Browse button under Select programmer section
From dialogue box select the prog_emmc_firehose mbn file and click OK
Click Download button and wait for flash process to complete
For a more detail tutorial on how to flash this device with QFIL, click here

You can also use tool like QcomDLoader to flash this phone.


LYF  WATER 1 LS-5002 QUICK REVIEW 
Lyf Water 1 runs on a 1.1 GHz quad-core Qualcomm Snapdragon 615 MSM8939 SoC. 2GB RAM and 16GB internal Storage can be expanded with 32GB TF Card. 13MP rear camera and 5MP front selfie camera. Preloaded with Android 5.1 Lollipop. Standard connectivity present are Wifi, Bluetooth and gps available. Dual SIM standby (2G/3G/4G network). 2600mAh Battery.


LYF WATER 1 LS-5002 STOCK ROM
Lyf_Water_1_LS_5002_V215_160114
DOWNLOAD ROM 


Lyf_Water_1_LS_5002_V213_151124
DOWNLOAD ROM 

Like and Share

Please Leave a comment after using this ROM


Report if you cannot download this file.

No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...