Monday, 15 January 2018


Android Box is now one of the common stuffs for family entertainment. It makes almost all TV to become smart. All you need to do is connect the box to TV with HDMI cable and you are golden to do almost anything that can be done on a smartphone with a bigger display. All those movies which usually give format not supported by you TV when using a USB flash can now be played using simple apps like VLC or MX Player. 
Even though these devices are great they can sometimes develop software errors and malfunction.  When this happens all you need to do is flash the stock firmware so that it gets back to factory state. Below is a list of stock firmware for xiaomi mi box and how to flash them.

Xiaomi MiBox 1 (Augustrush)
Model : MDZ-05-AA
Android 4.4.2 KitKat

Download Firmware

Xiaomi MiBox 1S (Casablanca)
Model: MDZ-06-AA
Android 4.4.2 KitKat

Download Firmware

Xiaomi Mi Box 2 (Dredd)
Model: MDZ-09-AA (AK)
Android 4.4.2 KitKat 

Download Firmware

Xiaomi MiBox 3 (JurassicPark)
Model: MDZ-16-AA
Android 5.1.1 Lollipop
Download Firmware

Xiaomi MiBox 3S (JurassicPark)
Model: MDZ-16-AB
Android 5.1.1 Lollipop

Download Firmware

Xiaomi MiBox 3 Pro (Enhanced)
Model: MDZ-18-AA
Android 5.1.1 Lollipop
Download Firmware

Xiaomi MiBox 3s (Queenchristina)
Model: MDZ-19-AA
Android 6.0.1 Marshmallow
Download Firmware

How to flash mi box with the firmware above

- Download the firmware of you device from the links above.

- Extract the downloaded file using 7zip or winrar.

- A USB flash storage (at most 32GB) is formatted in FAT32 format.

- Now copy the extracted files ( and xiaomi_update) into the USB flash drive.

- Connect a USB flash drive into the USB-port: 
Mi Box 3 / 3S using a standard USB port.
Mi Box 2 / 2S can use a standard USB port, microUSB with OTG-cable.
Mi Box 1 / 1S use microUSB with OTG-cable.

- Boot device into stock Recovery using the mi box remote by holding the following key combination.
Mi Box 3 / 3S (bluetooth remote) press and hold OK + Back button
Mi Box 1 / 1S / 2 / 2S (IR remote) press and hold Home + Menu button

- Firmware flashing process will start automatically, then will automatically restart.

Like and Share

No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...