Flashing Nokia phones with usb/connectivity cable have never been this easy. Just follow the steps below and you will flash your dead nokia phone with ease.
This tutorial is based on flashing Nokia S40 BB5 devices like Asha series, digit series (5130,3110c, 2700, 110,  etc). 

This process is valid only if your phone is hanging or software (firmware) is corrupted. 
If your phone is not powering due to hardware issues this process will not work.

Watch the video tutorial from here.

Download and install Nokia PC suite for drivers from here.
Download and extract Nokia BEST from here.
The BEST above is cracked. (Pls if you like the software support the developers by buying their box)
Download the firmware ( flash file ) of the Nokia S40 phones you want to flash.
You can download latest versions of firmware ( flash files ) using navifirm+ download it from here.

Put the files of the firmware inside a folder.
There are three main files for flashing nokia s40 devices.
MCU - PPM - CNT (image).

Launch Nokia BEST.
Click on MCU navigate to the folder containing the firmware files and select the mcu file.
Click on PPM1 and select the ppm file.
Click on CNT1 and select the image file.

Tick DeadMode.
Under FlashMode Settings select FullFlash.
Click FLASH.

Now connect your phone to the computer with a usb an insert battery. Wait for flashing process to begin ( On some phones you will need to press power button once for the process to begin)

Wait for the process to complete. This process can take about 15 mins depending on the phone.

The phone will boot after the process is completed.

Donation of any kind is really appreciated.
My Naija Guys hit me up with recharge cards 
Facebook Page:


Related Posts

Related Posts Plugin for WordPress, Blogger...