DOWNLOAD KIMFLY M1 STOCK ROM/FIRMWARE

Kimfly M1 Quick Review

This phone comes with a 5-inch touchscreen display with a resolution of 480 X 800 pixels with ~196ppi. A size of 139.5 x 71.5 x 7.9 mm and weighs about 150g.

Powered by 1.3GHz -core Spreadtrum Processor SC7731c and 512MB of RAM there’s also 8GB ROM which can be expanded up to 32GB with microSD. 

There is a 5-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth, Micro USB 2.0 also supports only 2G & 3G network. Sensors on this phone include Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope. 
Powered by a 2800Mah removable battery


DOWNLOAD KIMFLY M1 STOCK ROM


SP7731c_1h10_32v4_6.0_MRA58K_release-keys

S16_A_BP232_LX_V1.3_20170429
DOWNLOAD ROM

S16_A_BP232_mjlhz_V1.3_20170511
DOWNLOAD ROM

S16_M1_LX_232_V01_2017_01_10
DOWNLOAD ROM

S16F_MDLZ_232_V01_B1B8_2017_01_17
DOWNLOAD ROM

S16F_ZX_232_V01_2017_01_16
DOWNLOAD ROM


Learn how to easily download files from Mega
PC or Mobile


How to flash/upgrade this device 
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)

Download and install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the .pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices require holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device

For a more detail tutorial of this process with video and pictures click here
You can also use tools like MiracleBox, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

Like and Share

Donate to support this site

No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...