DOWNLOAD TECNO CAMON X CA7 STOCK ROM / FIRMWARE

Tecno Camon X CA7 quick specs & features
Tecno  CA7  runs on Android 8.1 Oreo themed with HiOS 3.3.

This device is a 6-inch ips touchscreen display with a resolution of 720 X 1440 pixels, 368ppi. A size of 158.6 x 75.8 x 5.2 mm and weighs about 172g.

Powered by 2.8GHz octa-core MediaTek Helip P23 MT6763T processor  with Mali-G71 MP2  GPU and 3GB of RAM. There’s also 16GB of internal storage which can be expanded up to 128GB with microSD. 

There is a 16MP primary camera with LED Flash and a 20-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.2. Supports GSM, WCDMA and 4G LTE networks. Sensors on this phone include fingerprint scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 3750Mah non-removable battery




DOWNLOAD TECNO CAMON X CA7 STOCK ROM

CA7-H633BCDK-O-180329V139
DOWNLOAD ROM

CA7-H633BCDK-O-V2-180502V170


How to flash this device using Tecno Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)



Download, MTK VCOM USB drivers from here
Download and extract Tecno flashtool from here
Launch SWD_AfterSales inside the extracted folder
Click on settings icon
Click on load button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Firmware Upgrade or Format + Download from drop down menu
Click Confirm Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

NOTE
If the while loading the scatter file you see checksum error, copy and checksumgen.exe into the firmware folder.

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

You can also use other tools like Miracle Box, Volcano, Infinity CMII, NCK etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.


Donate to support this site

4 comments:

  1. pls i need tecno CA7 checksum file

    ReplyDelete
  2. i'm having hard time flashing my tecno ca7

    the phone is bricked already now

    the sp tools ask for AUTH File while trying to flash the file

    ReplyDelete
  3. I need tecno cat 7 file working good

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...