
Tecno IA5 runs on Android 8.1 Oreo.
This device is a 6-inch ips touchscreen display with a resolution of 720 X 1440 pixels, 285ppi. A size of 160 x 76.3 x 8.5 mm and weighs about 137g.
This device is a 6-inch ips touchscreen display with a resolution of 720 X 1440 pixels, 285ppi. A size of 160 x 76.3 x 8.5 mm and weighs about 137g.
Powered by 1.4GHz quadcore Qualcomm Snapdragon425 processor with Andreno 308 and 3GB of RAM. There’s also 32GB of internal storage which can be expanded up to 128GB with microSD.
There is a 13MP primary camera with LED Flash and a 8-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM, WCDMA and 4G LTE networks. Sensors on this phone include fingerprint scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 4000Mah non-removable battery
DOWNLOAD TECNO IA5 STOCK ROM
IA5-QL1662B-O-IN-180428V15
How to flash this device using Qualcomm Image Flash Loader
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Download an install the latest version of QPST from here
Download an install Qualcomm usb drivers from here
Under Build type, select (tick) Flat Build
Under Select Programmer, Click Browse button then navigate to firmware folder open images folder and select prog_emmc_firehorse_XXXXX.mbn file.
Click on Load XML and select rawprogram0.xml and Patch0.xml
Connect the phone to PC while holding volume up and down button to phone into EDL mode
Port will now appear on QFIL tool.
Click Download button and wait for flash process to complete.
When process is complete, disconnect and boot up device.
Note that first boot after flash process takes longer than usual.
For a more detail tutorial on how to flash this device with QFIL, click here
Like and share
No comments:
Post a comment