How to reset security codes on MTK devices without losing any file or apps (without factory reset)

Sometimes we forget the security code, pin, pattern on our mobile phones. When that happens, the option is to factory reset the device which result in losing of files and apps found inside the device oouch that hurts.
I will be showing you how to remove that lock without losing any files, user settings or apps inside the phone. Simply follow the guide below

Download Miracle Box from here

Download and install MTK 65XX drivers from here

Launch Miracle Box

Under MTK TAB, Click Unlock/Fix

Tick Reset Code

Click Start Button

Turn off device and Connect to PC with USB cord

Miracle Box will detect the phone and start the reset code process

Wait for the process to complete

When you see Done, the process is complete

You can now disconnect the device and boot it up

Congrats Password, PIN or Pattern Lock is gone and files, user settings and apps still intact.

Watch the video on how to do this below

DOWNLOAD INFINIX HOT NOTE X551 STOCK ROM/FIRMWARE

Infinix X551 Quick Review

This phone comes with a 5.50-inch touchscreen display with a resolution of 720 x 1280 pixels with ~267ppi. A size of 118 x 63 x 12.9 mm and weighs about 161g.

Powered by 1.4Hz quad-core MediaTek MT6592 processor with Mali 450 GPU and 1GB/2GB of RAM there’s also 16GB/32GB of internal storage which can be expanded up to 32GB with microSD. 

Infinix X551 runs on Android 4.4 Kitkat and can be upgraded to Android 5.1 Lollipop.

There is a 8-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth. Supports 2G and 3G network. Sensors on this phone include Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 4000Mah non-removable battery

 How to flash infinix X551 using SP Flash Tool

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device.

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of the files below.

 INFINIX HOT NOTE X551 16+1 STOCK ROM/FIRMWARE

XUI INTERFACE

Android 5.1 Lollipop

 X551-G808-A1-L-20160722

DOWNLOAD

X551-G808-A1-L-20160325

DOWNLOAD

X551-G808-A1-L-20160115

DOWNLOAD

X551-G808-A1-L-20151106
DOWNLOAD

Android 4.4.2

X551-G808-A1-KK-20150701

DOWNLOAD

X551-G808-A1-KK-20150402

DOWNLOAD

****************************************************************************

INFINIX HOT NOTE X551 (16+2 & 32+2) STOCK ROM/FIRMWARE

XUI INTERFACE

Android 5.1 lollipop

X551-G808-BC-L-20160722

DOWNLOAD

X551-G808-BC-L-20160325

DOWNLOAD

X551-G808-BC-L-20160115

DOWNLOAD

Android 4.4 KitKat

X551-G808-BC-KK-28A-20150709

DOWNLOAD

X551-G808-BC-28A-20150422

DOWNLOAD

********************************************************************

INFINIX X551 (16+1) CWM BACKUP ROM

If you have a custom recovery installed, you can flash the zip file below.

Learn how to unbrick/flash device with CWM from here

CWM Recovery&Scatter file - DOWNLOAD

CWM Backup rom DOWNLOAD

Please leave a comment after using any these file

Report if you cannot download this file

Like and Share

facebook.com/romkingz

DOWNLOAD iTEL IT1506 STOCK ROM / FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong firmware, can render the device useless 

(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here

Download the latest version of Research Download or UpgradeDownload from here

Extract and Launch Research Download/UpgradeDownload Tool

Click on load icon

Navigate to the folder containing the firmware

Select the pac file in the firmware folder

Wait for it to load in Research Download/UpgradeDownload tool

Click Play/Start button

Now connect the device to PC while holding volume down key

(Some new devices requires holding volume up key)

Wait for flashing process to complete

When you see Passed! Then note that the flashing or upgrading process is complete

Disconnect and boot up device

For a more detail tutorial with video and pictures click here

You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

ITEL 1506 QUICK SPECS 

Android 5.1 (Lollipop)

Dimensions - 145 x 73.2 x 10.5 mm

5-inch Touchscreen, 480 x 854 195ppi 

1.2GHz quad core

512 MB RAM

8GB Internal Memory 

Supports up to 32GB microSD

8 MP Rear Camera, LED Flash,
2 MP Front Camera

Dual SIM

EDGE / GPRS 

WIFI 802.11 b/g/n

bluetooth 3.0

3600mAh Battery

ITEL 1506 STOCK ROM
IT506-W501-20151015-RELEASE

DOWNLOAD ROM

Please Leave a comment after using this ROM
Like and share

DOWNLOAD ITEL IT1702 STOCK ROM / FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong firmware, can render the device useless 

(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here

Download the latest version of Research Download or UpgradeDownload from here

Extract and Launch Research Download/UpgradeDownload Tool

Click on load icon

Navigate to the folder containing the firmware

Select the pac file in the firmware folder

Wait for it to load in Research Download/UpgradeDownload tool

Click Play/Start button

Now connect the device to PC while holding volume down key

(Some new devices requires holding volume up key)

Wait for flashing process to complete

When you see Passed! Then note that the flashing or upgrading process is complete

Disconnect and boot up device

For a more detail tutorial with video and pictures click here

You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

ITEL 17012 QUICK SPECS 

Android 5.1 (Lollipop)

7-inch Touchscreen, 1024 x 600 , IPS 196 ppi 
190 x 109 x 10.2 mm

1.2GHz quad core

1GB RAM

16GB Internal Memory 

Supports up to 32GB microSD

8 MP Rear Camera, LED Flash,
5 MP Front Camera

Dual SIM

EDGE / GPRS 
HSDPA+

WIFI 802.11 b/g/n

bluetooth 3.0

3000mAh Battery

ITEL 1702 STOCK ROM
IT1702-V605-20150930

DOWNLOAD ROM

Please Leave a comment after using this ROM

Report if you cannot download this file.

DOWNLOAD ITEL IT1402 STOCK ROM / FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong firmware, can render the device useless 

(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here

Download the latest version of Research Download or UpgradeDownload from here

Extract and Launch Research Download/UpgradeDownload Tool

Click on load icon

Navigate to the folder containing the firmware

Select the pac file in the firmware folder

Wait for it to load in Research Download/UpgradeDownload tool

Click Play/Start button

Now connect the device to PC while holding volume down key

(Some new devices requires holding volume up key)

Wait for flashing process to complete

When you see Passed! Then note that the flashing or upgrading process is complete

Disconnect and boot up device

For a more detail tutorial with video and pictures click here

You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

ITEL 1402 QUICK SPECS 

Android 2.3 (Ginger Bread)

Dimensions - 112.8 x 62.1 x 12.3 mm

4.0-inch Touchscreen, 480 x 320 , IPS 144ppi 

1.0GHz single core

512 MB RAM

512MB Internal Memory  
8GB microSD included

3 MP Rear Camera, LED Flash,
3 MP Front Camera

Dual SIM

EDGE / GPRS 
HSDPA / HSUPA

WIFI 802.11 b/g/n

bluetooth 2.0

ITEL 1402 STOCK ROM
IT1402-T188_20140426_A1_0.0.5

DOWNLOAD ROM 

DOWNLOAD ITEL IT1400 STOCK ROM / FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong firmware, can render the device useless 

(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here

Download the latest version of Research Download or UpgradeDownload from here

Extract and Launch Research Download/UpgradeDownload Tool

Click on load icon

Navigate to the folder containing the firmware

Select the pac file in the firmware folder

Wait for it to load in Research Download/UpgradeDownload tool

Click Play/Start button

Now connect the device to PC while holding volume down key

(Some new devices requires holding volume up key)

Wait for flashing process to complete

When you see Passed! Then note that the flashing or upgrading process is complete

Disconnect and boot up device

For a more detail tutorial with video and pictures click here

You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

ITEL 1400 QUICK SPECS 

Android 2.3.5 (Ginger Bread)

Dimensions - 113 x 62 x 13 mm
3.5-inch Touchscreen, 320 x 480 , IPS 165 ppi 
Weight - 120g

1.0GHz Single core processor

512 MB RAM

512 MB Internal Memory 

Supports up to 8GB microSD

3 MP Rear Camera, LED Flash,
1.3 front camera

Dual SIM

EDGE / GPRS 

WIFI 802.11 b/g/n

bluetooth 2.0

1400mAh Battery

ITEL 1400 STOCK ROM
IT1400-T268-20131216_E1_OGS_0.3.0

DOWNLOAD ROM

IT1400-T268-20140107_E3_GG_0.3.2

DOWNLOAD ROM

Please Leave a comment after using this ROM
Like and share

Report if you cannot download this file.

Download Miracle BOX with Loader

If you don’t know, Miracle BOX is one of the most useful software for Mobile phone repair especially China devices. It has support for the following CPU and the list is still updating.

Latest MTK

Latest SPD

Qualcomm

COOLSAND/RDA

MSTAR

Blackberry

CDMA Mobiles

DOWNLOAD TECNO C8 STOCK ROM

Learn how to unbrick/flash this device using sp flash tool from here

Learn how to flash this device using SP MultiPortDownloadTool from here 

Note

Follow the instructions on how to flash the device carefully from the link above

I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloder, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

TECNO C8 SPECS 

Android 5.0 (Lollipop) upgradable to Android 6.0 HiOS (Marshmallow)

5.5-inch Touchscreen, 720 x 1280 , IPS 267 ppi 

1.3GHz quad-core Processor
MT6735
Mali T760 GPU

1GB RAM

16GB Internal Memory 

Supports up to 32GB microSD

13MP Rear Camera, LED Flash, Auto Focus

5MP Front Camera 

Dual SIM

EDGE / GPRS 

WCDMA

WIFI 802.11 b/g/n

bluetooth 4.0

3000mAh Battery

TECNO C8 STOCK ROM
C8-H352-A2-L-20150811
DOWNLOAD ROM

C8-H352-A2-L-20151207
DOWNLOAD ROM

C8-H352-A2-L-20160307
DOWNLOAD ROM

C8-H352-A2-M-HiOS-20160425
DOWNLOAD ROM

Please Leave a comment after using this ROM

Report if you cannot download this file.

DOWNLOAD TECNO J7 STOCK ROM

Learn how to unbrick/flash this device using sp flash tool from here

Learn how to flash this device using SP MultiPortDownloadTool from here 

Note

Follow the instructions on how to flash the device carefully from the link above

I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloder, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

TECNO J7 SPECS 

Android 4.4 (KitKat)

Dimensions - 143 x 71.9 x 8.93 mm

5-inch Touchscreen, 720 x 1280 , IPS 294 ppi 

1.3GHz quad-core Processor
MT6582
Mali 400MP2 GPU

1GB RAM

8GB Internal Memory 

Supports up to 32GB microSD

8 MP Rear Camera, LED Flash, Auto Focus

2 MP Front Camera 

Dual SIM

EDGE / GPRS 

WCDMA

WIFI 802.11 b/g/n

bluetooth 3.0

2020mAh Battery

TECNO J7 STOCK ROM

J7-G345-A1-KK-20150309
DOWNLOAD ROM 



J7-G345-A1-KK-EG-20150425
DOWNLOAD ROM


J7-G345-A1-KK-RWA-MTN-R6-20150706
MTN RWANDA
DOWNLOAD ROM

Please Leave a comment after using this ROM

Report if you cannot download this file.

DOWNLOAD TECNO Y3 STOCK ROM

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

TECNO Y3 QUICK SPECS 

Android 4.4.2 (KitKat)

4-inch Touchscreen, 480 x 800 , IPS 233 ppi 

1.0GHz dual-core Cortex A9 CPU
MT6577
SGX531u GPU

512MB RAM

8GB Internal Memory 

Supports up to 32GB microSD

2 MP Rear Camera, LED Flash, Auto Focus

0.3 MP Front Camera 

Dual SIM

EDGE / GPRS 

WCDMA

WIFI 802.11 b/g/n

bluetooth 4.0

1800mAh Battery

TECNO Y3 STOCK ROM
Y3-G220-G1-KK-R6-20150914
DOWNLOAD ROM

======================================

Y3-G220-G1-KK-20150401
DOWNLOAD ROM

Y3-G220-G1-KK-20150321
DOWNLOAD ROM 

==============================================

Y3-G220-H1-KK-EG-20150319
DOWNLOAD ROM

 Learn how to easily download files from Mega

PC or Mobile

Well since a lot of people have been asking for the other variants of this ROM, I decided to post all of  them but note that its hosted on MultiCloud which will be kind of slow to download.
Soon the files will be uploaded to Google Drive cause as of now my network is too poor

Y3-G220-G1-KK-20150228

DOWNLOAD ROM

Y3-G220-G1-KK-ET-20150407

DOWNLOAD ROM

Y3-G220-G1-KK-RW-TIGO-20150710

Rwanda Tigo Network

DOWNLOAD ROM

Y3-G220-G1-KK-TZ-TIGO-20150423

Tanzania Tigo Network

DOWNLOAD ROM

Y3-G220-G1-KK-TZ-TIGO-OPEN-20150429

Tanzania Tigo Network

DOWNLOAD ROM

Please Leave a comment after using this ROM

Report if you cannot download this file.