Dimension: 76.8 x 153.5 x 8.75 mm
Weight: 163g
CPU: 1.3GHz Quad Core
SoC: MediaTek MT6580
GPU: Mali 400 MP2
RAM: 2GB
Storage: 16GB internal up to 64GB microSD
Camera: 2 MP front & 8 MP back
Dual SIM
GPRS - EDGE – HSPA+
WiFi b, g, n, WiFi hotspot
Blutooth 4.0
USB 2.0
Battery: 2700mAh
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
How to flash MTK devices using SP Flash Tool
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Blackview E7s Stock Firmware
Android 4.4 KitKat
E7s_Blackview_20161202
Size - 699MB
No comments:
Post a Comment