DOWNLOAD GIONEE S10CL STOCK ROM / FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong file, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

How to flash this devices using Qualcomm Flash Image Loader (QFIL)

Download an install the latest version of QPST from here
Download an install Qualcomm usb drivers from here

To launch QFIL, navigate to 
C:\Program Files\Qualcomm\QPST\bin)
Now connect your infinix hot 3 X553 to PC while holding both vol up & down button
Device will be detected and you will see 
Qualcomm HS-USB QDLoader 9008 (COM XX)

Click Browse button under Select Build section

Navigate and select the folder of the firmware

Click on XML button
from the pop up, select rawprogram xml  file and then patch xml file

Click Browse button under Select programmer section

From dialogue box select the prog_emmc_firehose mbn file and click OK

Click Download button and wait for flash process to complete

For a more detail tutorial on how to flash this device with QFIL, click here

You can also use tool like QcomDLoader to flash this phone.

GIONEE S10CL  QUICK SPECS

Dimension - 148.7 x 73.7 x 7.9 mm

5.2 - inch Touchscreen, 720 x 1280 pixels

Weight - 151g
Android 7.1 Nougat

1.4 GHz quad-core Qualcomm MSM8937 processor

4GB RAM

32GB Internal Memory 

up to 128GB microSD

13MP Rear Camera, LED Flash, Auto Focus

16MP Front Camera 

Dual SIM

EDGE , GPRS - 850 / 900 / 1800 / 1900MH

WCDMA 900/2100
4G LTE

WIFI 802.11 b/g/n

bluetooth 4.0

3100mAh Battery

GIONEE S10CL STOCK ROM

S10CL-T2575-N-20170606
DOWNLOAD ROM

Please leave a comment after using this ROM

Report if you cannot download this file.

Like & Share
facebook.com/romkingz

Subscribe to my channel
Youtube.com/c/AmparasTking