DOWNLOAD TECNO CAMON 15 CD7 FACTORY SIGNED FIRMWARE / STOCK ROM

Tecno Camon 15 CD7 Quick Review
Tecno CD7 runs on Android 10 themed with HiOS 6.0

This device is a 6-inch ips touchscreen display with a resolution of 720 X 1440 pixels 266ppi. A size of 164.1 x 76.8 x 8.8 mm and weighs about 203g.

Powered by Mediatek Helio P22 MT6762 processor clock speed of 2.0GHz with 4GB of RAM. There’s also 128GB of internal storage which can be expanded up to 64GB with microSD. 

There is a 48MP/2MP/2MP/QVGA primary camera with LED Flash and a 16MP front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Support GSM+HSPA+LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope..

This device is powered with a 5000Mah non-removable battery






DOWNLOAD TECNO CD7 STOCK ROM

CD7-H6214ABDE-Q-GL-200515V508

CD7-H6214AB-Q-200102V359


How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)




Download, MTK VCOM USB drivers from here
Download and extract Tecno flashtool from here
Launch SWD_AfterSales inside the extracted folder
Click on settings icon
Click on load button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Firmware Upgrade or Format + Download from drop down menu.
Click Confirm Button.
Now turn off and connect your device to PC.
Wait for flashing process to complete.
Reboot device

NOTE
If the while loading the scatter file you see checksum error, copy checksumgen.exe into the firmware folder and then launch it.


If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share


Donate to support this site

No comments:

Post a comment

Related Posts

Related Posts Plugin for WordPress, Blogger...