DOWNLOAD TECNO CAMON 15 PRO CD8 FACTORY SIGNED FIRMWARE / STOCK ROM

Tecno Camon 15 Pro CD8 Quick Review
Tecno CD8 runs on Android 9 edition themed with HiOS 3.3.

This device is a 6-inch ips touchscreen display with a resolution of 1080 X 2340 pixels 395ppi. A size of 163 x 78 x 9 mm and weighs about 203g.

Powered by Mediatek Helio P35 MT6765 processor clock speed of 2.3GHz with 6GB of RAM. There’s also 128GB of internal storage which can be expanded up to 64GB with microSD. 

There is a 48MP/5MP/2MP/0.08MP primary camera with LED Flash and a 32MP front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Support GSM+WCDMA+4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope..

This device is powered with a 4000Mah non-removable battery






DOWNLOAD TECNO CD8 STOCK ROM

CD8-H655BCD-Q-200114V219
How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)




Download, MTK VCOM USB drivers from here
Download and extract Tecno flashtool from here
Launch SWD_AfterSales inside the extracted folder
Click on settings icon
Click on load button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Firmware Upgrade or Format + Download from drop down menu.
Click Confirm Button.
Now turn off and connect your device to PC.
Wait for flashing process to complete.
Reboot device

NOTE
If the while loading the scatter file you see checksum error, copy checksumgen.exe into the firmware folder and then launch it.


If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share


Donate to support this site

No comments:

Post a comment

Related Posts

Related Posts Plugin for WordPress, Blogger...