Friday, 5 June 2015

DOWNLOAD TECNO M5 STOCK ROM

Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

TECNO M5 QUICK SPECS

Dimensions: 135.6 x 68.3 x 10.5 mm
Storage: 4GB ROM up to 32GB microSD card
Memory: 1B RAM
Display: 4.5-inch IPS Touch Display (480 x 854 pixels, 195 ppi)
Rear Camera: 8 MP Camera with Flash, Autofocus
Front Camera: 1.3 MP Secondary Camera
Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.3GHz Dual-core Processor
Dual SIM
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21 Mbps)
1800 mAH Battery Capacity

TECNO M5 STOCK ROM
M5_AW660_LWDKV06.1.0.1.3T09A0728_M002

TECNO M5 MTK BACKUP


7 comments:

  1. has someoe tried out this stock rom n has it worked?

    ReplyDelete
  2. my m5 if hard bricked ive tried flashing this ROM but i get a BROM space error on sp flash tool... can someone please guide me or tell me what am doing wrong. ive tried various versions of the flash tool. however the formatting, read back and memory test are successful. The red bar goes to 100% and the purple one goes to 100% but then follows the error message .. either a brom space error ... or check if VA path.... check if rom files exist.......

    ReplyDelete
  3. upload much as u can bro it's helpful to us thank you much am feel happy to be here

    ReplyDelete
  4. Nice work, romkingz, pls. do something abt this rom (M5) the file is not working, after flashing stock on logo. Thanks

    ReplyDelete
  5. nice work by this stock no work after flash hi stay on boot logo

    ReplyDelete
    Replies
    1. Do a factory reset from recovery.
      By the way I will be updating this file soon
      Stay tuned......... :D

      Delete

Related Posts

Related Posts Plugin for WordPress, Blogger...