Thursday, 29 September 2016


Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
 If you encounter any error while flashing your device, click here and see if it solves your problem
Dimension - 116 x 62 x 11.9 mm
3.5 - inch Touchscreen, 320 x 480 pixels
Weight - 194g

1.0 GHz dual-core Processor
MediaTek MT6572
Mali 400-MP2 GPU

4GB Internal Memory 

up to 32GB microSD
3MP Rear Camera, LED Flash, Auto Focus
0.3 MP Front Camera 

Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 2100
WIFI 802.11 b/g/n
bluetooth 4.0

2000mAh Battery


 Learn how to easily download files from Mega
PC or Mobile

Report if you cannot download any of these files.
Like and share
Donate to support this site

No comments:

Post a Comment

Related Posts

Related Posts Plugin for WordPress, Blogger...