DOWNLOAD TECNO P5 OLD OS STOCK ROM


Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device



If you encounter any error while flashing your device, click here and see if it solves your problem

TECNO P5 QUICK  SPECS
Dimensions: 124.3 x 65.5 x 10.5 mm
Storage: 4GB ROM up to 32GB microSD card
Memory: 512MB RAM
Display: 4.0-inch TFT Capacitive Touch Display (480 x 800 pixels, 233 ppi)
Rear Camera: 5 MP Camera with Flash, Autofocus, Smile detector
Front Camera: 2 MP Secondary Camera
Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.0GHz Dual-core Processor

Dual SIM
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21 Mbps)
1800 mAH Battery Capacity

TECNO P5  OLD  OS STOCK ROM
DOWNLOAD

Do not flash this ROM on Tecno P5 having NEW OS

If you are in need of Tecno P5 new OS stock ROM click here

27 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. How will you know the difference between the new and the old P5 ROMS

    ReplyDelete
    Replies
    1. The old one boots with a blue TECNO logo wilhe New one boots with shiny white logo
      hope this helps

      Delete
  3. like u bro 100~`````` ur da real king my tecno complyt dead not charging how to fixx

    ReplyDelete
    Replies
    1. Download the right ROM of your device and flash it using SP Flash tool

      Delete
  4. I download rom but no calling

    ReplyDelete
    Replies
    1. I still don't understand ur question

      Delete
    2. I still don't understand ur question

      Delete
    3. the phone gives invalid IMEI, Phone detects the two networks but network has X label on it

      Delete
    4. Restore ur imei with mtk engineering, mobile uncle, mtk droid tool or sn station

      Delete
  5. I have one Tecno p5 that only vibrate when you try to ON it...I've tried flashing it with p5 new and p5 old flash file but its not working...getting brom error 3183 with the two. Files...any solution pls?....thank you

    ReplyDelete
  6. I have one Tecno p5 that only vibrate when you try to ON it...I've tried flashing it with p5 new and p5 old flash file but its not working...getting brom error 3183 with the two. Files...any solution pls?....thank you

    ReplyDelete
  7. I have one Tecno p5 that only vibrate when you try to ON it...I've tried flashing it with p5 new and p5 old flash file but its not working...getting brom error 3183 with the two. Files...any solution pls?....thank you

    ReplyDelete
    Replies
    1. Use a flashing box like volcano or miracle for that

      Delete
  8. When I am flashing my tecno p5 it keep telling me not enough memory please any help

    ReplyDelete
    Replies
    1. If you are sure the ROM is for your phone model, use format + download

      Delete
  9. Hiii King, pls, wuld I still nid to download d Sp flash after downloading d Rom 4 my P5

    ReplyDelete
  10. What exactly is the problem sir, all am getting is ENABLE DRAM FIAL ERROR which probably mean am flashing a wrong ROM so I decide to download both ROMs(new and old) but the problem still persist.

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. brom error s_ft_enable_dram_fail (4032) solution

    ReplyDelete
  13. Good day to you all.. In fact I did all what you've written here .. I first of all did the old Tecno P5 got error code ft-enable-fail (4032)... and i went to download another new firmware tecno p5 but didnt work still got the same error code. please what can i do ? my tecno has been off since two months now. tecno p5 4.2.2 version. thank you.

    ReplyDelete
  14. My p5 can't hardreset, it just bypasses after selection emmc option,what should I do?

    ReplyDelete
  15. When trying to flash my tecno p5 it says "wrong format range" how do i go about this.

    ReplyDelete
  16. Bro I have one problem

    My tecno m6 dead after flashing it what should I do pls help

    ReplyDelete
  17. Interesting post. I Have Been wondering about this issue, so thanks for posting. Pretty cool post.It 's really very nice and Useful post.Thanks
    how to use sp flash tool

    ReplyDelete
  18. it working thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...