DOWNLOAD KINGZONE Z1 PLUS STOCK ROM / FIRMWARE

Kingzone Z1 Plus Quick Review
Kingzone Z1 Plus runs on Android 5.1 Lollipop.

This device is a 5-inch ips touchscreen display with a resolution of 1280 X 720 pixels. A size of 153.5 x 76 x 7.5 mm and weighs about 169g.

Powered by 1.3GHz octa-core processor MediaTek MT6753 with Mali-T720 and 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to 64GB with microSD. 

There is a 13MP primary camera with LED Flash and a 13-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM+WCDMA+LTE FDD network mode. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 3500Mah non-removable battery



DOWNLOAD KINGZONE Z1 PLUS STOCK ROM

KINGZONE_Z1_PLUS_20160318_c221v53_tz


How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share

Donate to support this site

8 comments:

  1. Hey, not working for me. I flashed this rom to my KZ Z1 Plus and screen only shows stripes instead kingzone logo...

    ReplyDelete
  2. i am getting same problem. can anyone help

    ReplyDelete
    Replies
    1. Do you know the actual build number of your device??
      Or send me a picture of the board id

      Delete
  3. I think it was KINGZONE_Z1_PLUS_20151209_c221v53_tz

    ReplyDelete
  4. i cannot see the build number as i dont have display now

    ReplyDelete
  5. I hope it will work fine if you have older version of firmware

    ReplyDelete
    Replies
    1. I will check and see i can get another firmware for you. Or it will be best if you provide me with the board id of this device so I can search function for it faster

      Delete
  6. Pls I'm getting a bad display after flashing, help

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...