DOWNLOAD LYF WIND 6 LS-5006 STOCK ROM / FIRMWARE



Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)


How to flash this devices using Qualcomm Flash Image Loader (QFIL)
Download an install the latest version of QPST from here
Download an install Qualcomm usb drivers from here
To launch QFIL, navigate to 
C:\Program Files\Qualcomm\QPST\bin)
Now connect your lyf device to PC while holding both vol up & down button
Device will be detected and you will see 
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml  file and then patch xml file
Click Browse button under Select programmer section
From dialogue box select the prog_emmc_firehose mbn file and click OK
Click Download button and wait for flash process to complete
For a more detail tutorial on how to flash this device with QFIL, click here

You can also use tool like QcomDLoader to flash this phone.


LYF WIND 6 LS-5006 QUICK REVIEW 
Lyf Wind 6 runs on a 1.1 GHz quad-core Qualcomm Snapdragon 210 MSM8909 SoC. 1GB RAM and 8GB internal Storage can be expanded with 32GB TF Card. 5MP rear camera and 5MP front selfie camera. Preloaded with Android 5.1 Lollipop. Standard connectivity present are Wifi, Bluetooth and gps available. Dual SIM standby (2G/3G/4G network). 2250mAh Battery.


LYF WIND 6 LS-5006 STOCK ROM
Lyf_Wind_6_LS_5009_V209_160115
DOWNLOAD ROM 

Lyf_Wind_6_LS_5009_V213_16011
DOWNLOAD ROM 


Like and Share

Please Leave a comment after using this ROM


Report if you cannot download this file.

1 comment:

Related Posts

Related Posts Plugin for WordPress, Blogger...