DOWNLOAD OUKITEL K10000 PRO STOCK ROM / FIRMWARE

Oukitel K10000 Pro Quick Review
Oukitel K10000 runs on Android 7.0 Nougat.

This device is a 5.5-inch ips touchscreen display with a resolution of 1280 X 720 pixels. A size of 155.7 x 77.3 x 9.9 mm and weighs about 28g.

Powered by 1.5 GHz quad-core processor MediaTek MT6750T with 3GB of RAM. There’s also 64GB of internal storage which can be expanded up to 128GB with microSD. 

There is a 16MP primary camera with LED Flash and a 5-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM+WCDMA+LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 10000Mah non-removable battery

DOWNLOAD OUKITEL K10000 PRO STOCK ROM

OUKUTEL_K10000_PRO_V14_20171103
DOWNLOAD ROM


How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share

Donate to support this site

2 comments:

  1. My oukitel k1000 pro shows error when flashing with sp flash tool,NCK box, inferno, cm2, eft,and miracle thunder. And the only problem of the phone is privacy protection code. Pls help

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...