DOWNLOAD INFINIX HOT 3 X554 STOCK ROM



Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

How to flash infinix devices using SP Flash Tool

Download, latest MTK VCOM drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device


If you encounter any error while flashing your device, click
here and see if it solves your problem



INFINIX HOT 3 X554
SPECS
Dimension - 142 x 70.2 x 7.1 mm
5.5 - inch Touchscreen, 720 x 1280 pixels
Weight - 194g
1.3 GHz octa-core Processor
MediaTek MT6580
Mali 400-MP2 GPU
1GB RAM
16GB Internal Memory 
up to 32GB microSD
8MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera 
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
WIFI 802.11 b/g/n
bluetooth 4.0
3000mAh Battery

INFINIX HOT 3 X554 STOCK ROM

X554-W90918A1-L-20160810V2
DOWNLOAD ROM


X554-W90918-A1-L-20160407
DOWNLOAD ROM
*****************************************


X554-W90918A2-L-20160801V2
DOWNLOAD ROM


X554-W90918-A2-L-20160409
DOWNLOAD ROM

X554-W90918-A2-L-20160304
DOWNLOAD ROM


Learn how to easily download files from Mega
PC or Mobile

Please leave a comment after using this ROM
Report if you cannot download this file.



How to root Samsung Galaxy S7 SM-G930F & Galaxy S7 EDGE SM-G935F


If you are already with the new Samsung Galaxy S7 SM-G930F or S7 EDGE SM-G935 and need root access on it right away, follow the steps below

Note
The device must have at least 10% battery life
Use this tutorial at your own risk!

Download an install Samsung USB Drivers from here
Download an extract odin from here (latest version preferable)
Download an extract CF Auto Root Package for Galaxy S7 SM-G930F here
Download an extract CF Auto Root Package for Galaxy S7 EDGE SM-G935F here

Put your device into Download Mode by pressing the following key combination
Volume Down + Home + Power for about 3 Seconds When you see the warning message , Press Volume Up.
If pressing the key combination is hard for you, you can always use Samsung 300K Tool to put Samsung devices into download mode.

When device is in download mode, connect it to PC using USB cord

Launch odin
You will see Added! inside Message box
Now click PDA button
Navigate to CF Auto Root Package folder
Select CF Auto-Root.tar file

Click Start Button
Wait for flashing process to complete (takes about 30 seconds)
When you see PASS! in green, flashing process is complete
Disconnect and boot up device

Open your App menu and check if you will see Supersu icon
Verify if your phone is properly rooted using Root Checker.




Thumbs Up to ChainFire for the creation of Auto Root files


Upgrade Tecno Camon C8 to the new HiOS + Android 6.0 Marshmallow

We have been expecting Android 6.0 Marshmallow for Tecno Camon C8 but instead Tecno just released a Beta update of its new HiOS of this device. If you don't know, HiOS is a new custom user interface (UI) for Tecno just like the XUI on infinix. It makes your phone look smart, different and also fun to use.


Note
Make sure your device is not rooted.
At least 20% battery life
Make backup of your device (MoboRobo or Syncios are cool :D )
Romkingz is not responsible for whatever may happen to your device
Do at your own risk.

You can update your device to the new HiOS by flashing the update.zip package from SD card in recovery menu.
Follow the procedure below to update your device


Download the Update.zip file from the links below. Make sure you download the right one of your device.

HiOS with Android 6.0 Mashmallow
Tcard_update_20160415
868MB

*************************************************************************
HiOS with Android 5.0 Lollipop

Devices with C8-H352-A2-L-20160118 build only
28.4MB
DOWNLOAD

Other Older Builds

Copy the update.zip file to the root of your SDcard

Turn off device and boot into stock recovery holding volume up + Power button for about 3secs

When you see the android robot with warning sign, hold volume up and press power button to enter into recovery menu

Navigate using volume and select Apply update from sdcard using power button.

Select update.zip or Tcard_update_20160415 from the menu

Wait for Update process to complete (takes about 2 mins)

When you see install from SDcard complete, Reboot your device


Note
After this update, the first boot will take longer than normal so be patient



Enjoy this new update from Tecno

Fix XBO devices display problem after flash


Most times after flashing XBO devices, the display of the device is either white or shows some funny colors. This is as a result of flashing lk.bin or uboot.bin file which does not match the device.
Its always wise to make a backup of the following files boot.img, lk.bin or uboot.bin & logo.bin using a tool like Miracle Box just in case if things go wrong.


It will be nice if you guys can make backup of the files above and send so I can post it here to help others


Download XBO Stock ROMs/Firmwares from here


How to use display fix files
Download and extract the display fix file of the phone you want to fix
Launch SP Flash tool
Click Scatter Loader Button
Navigate to the extracted folder
Select the scatter file
Click Download button
Connect device and wait for flash process to complete
Takes about 5 seconds

The following files below are display fix files for XBO devices only.














Due to the numerous XBO devices created monthly, I cannot keep up with uploading display fix files. If your device is not among in the list above, don't sweat. Just send me an email with a picture of your board id I will upload the file.

Note
Sometimes the firmware flashed on the device can be the cause of this. Be careful especially when you want to flash preloader.

Download Samsung Galaxy S4 SHV-E300S Stock Firmware

Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

How to flash spreadtrum devices (iTel, M-Horse, Cherry etc) using Miracle Box

This is another tutorial on how to use Miracle Box for newbies. I will be showing you  how to flash/upgrade devices with Spreadtrum Chipset (SPD) using Miracle Box. Watch the video or follow the tutorial below

Note
You must have at least 10% battery life
Do at your own risk!

Watch the video below


Download Miracle Box from here
Download and install SPD drivers from here


Launch Miracle Box
Click on SPD tab
Tick Write
Under Choose type, select the chip of the phone you want to flash
Click the folder Icon, then navigate to the folder containing the pac file of the device you want to flash.
Select the pac file
Click Start Button


Turn off device and connect to PC while holding volume down button
(Some new devices require holding volume up instead)
Miracle Box will detect the device and pop up all partitions to be flashed.
Tick whatever part you want to flash on the device and click OK.
(For full flash, tick everything)

Wait for flashing process to complete
When you see Write Complete, know that flashing process is complete.
Disconnect and reboot device

If you enjoy using this software, buy the box to support developers & also get latest updates




Download Samsung Galaxy E7 SM-E700M Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here


Samsung Galaxy E700M Stock Firmware

Trinidad & Tobago

Brazil

To flash or upgrade your Galaxy SM-E700M with any of this firmware,

- Download and install samsung drivers
- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process
For a more detailed process on how to flash or upgrade Samsung devices, click here

Download Samsung Galaxy E7 SM-E700H Stock Firmware



Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here


Samsung Galaxy E700H Stock Firmware

Download Samsung Galaxy E7 SM-E700F Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here



Samsung Galaxy E700F Stock Firmware

Download Samsung Galaxy E5 SM-E500M Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here


Samsung Galaxy E500M Stock Firmware

How to remove Factory Reset Protection on Samsung devices using Odin

 

Samsung included the factory reset protection on most of their new devices. So after using factory reset from recovery menu, setting up the phone requires you to enter the Google account used previously on the phone which can be annoying especially if you bought the phone from someone and just need to set it up as a new device.

This tutorial will show you how to remove this FRP lock on Samsung devices using odin.
First of all you will need to Download and install Samsung USB drivers from here
Download Odin from here
Download and extract FRP Reset Pack from here
Inside the extracted folder, you will see FRP of different devices.
Extract the one of the device you want to remove FRP lock
Launch Odin
Click on PDA or AP button
Navigate to the folder containing the FRP file of your device
Select the file (eg J700F_FRP_Reset)
Boot device into download mode by Holding Volume Down + Home + Power button
Connect device to PC using USB
Odin will detect device and display its COM PORT
Click Start button and wait for process to complete (takes about 5secs)
Reboot Device


The Pack above contain FRP files for the following phones below
If you get and error message with invalid md5, rename the file from tar.md5 to tar

G550FY, G920F, G920I, G920T, G920T, G920T1, G920T1, G920w8, G925F, G925i, G925I, G925T, G925w8, G928C, G928F, G928G, G928I, G928T, G928w8, J700F, N920C, N920G, N920G, N920I, N920T, N920w8
SBOOT_G920F, SBOOT_G920I, SBOOT_G920t, SBOOT_G920t1, SBOOT_G920t1, SBOOT_G920w8, SBOOT_G925F, SBOOT_G925I, SBOOT_G925t, SBOOT_G925w8, SBOOT_G928C, SBOOT_G928F, SBOOT_G928G, SBOOT_G928I, SBOOT_G928t, SBOOT_G928w8, SBOOT_N920C, SBOOT_N920G, SBOOT_N920I, SBOOT_N920t, SBOOT_N920w8

More will be added as time goes on

How to use eMMC DL Tool to flash Qualcomm devices






















Note
Make sure the device has at least 10% battery life
Do at your own risk!

Download an extract eMMC DL tool from here
Download an extract the Stock ROM of the device you want to Flash or upgrade

Install Qualcomm USB drivers from the extracted folder

Connect the device to PC while holding volume up + volume down. (Some devices require holding only volume up or just volume down)
Once device is connected properly, go to device manager of your PC (Right Click on Computer > Properties > Device Manager)
Expand Port (COM & LPT) and note the port number of Qualcomm HS-Diagnostics



Now launch eMMC DL Tool
Input the COM Port number of Qualcomm HS-Diagnostics after Disk1
Click on FW Path browse button
Navigate and select folder containing the firmware of the device you want to flash
The firmware will be added successfully to eMMc DL Tool


Click DL1 to start flashing or upgrading process
You will see 2 green bars indicating flashing progress
When you see Green Pass, know that flash process is complete



Download Samsung Galaxy E5 Stock Firmwares

Samsung Galaxy E5 Specs

OS
Android 4.4.4 kitkat upgradeable to 5.1.1 lollipop

141.6 x 70 x 7.3mm in dimension
5.5 inches display
720 x 1280px in resolution (267ppi)

Quadcore 1.2GHz

MEMORY
8GB internal
1.5GB RAM
up to 64GB microSD

8MP Back Camera & 5MP front Camera

GSM/HSPA Network
***********************************************************************************************

Download Samsung Galaxy E5 Stock Firmware form links below




The firmware above can be flash using Odin


- Download and install samsung drivers
- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process

For a more detailed process on how to flash or upgrade Samsung devices, click here

Download Samsung Galaxy E5 SM-E500H Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here

Samsung Galaxy E500H Stock Firmware

Download Samsung Galaxy S2 Epic SPH-D710 Stock Firmware


Flash/unbrick or upgrade your device with the firmwares below using odin
Learn how to use odin from here


Samsung Galaxy S2 SPH D710 SPRINT Stock Firmware


D710USFI27_D710USFI27


D710USFL24_D710USFL24


D710USGB27_D710USGB27



For other Samsung firmwares, click here

How to unlock MTK devices locked with Pattern Lock without Factory Reset

This is the second tutorial on miracle box for newbies.
for other Miracle box tutorial, click here

Most times its annoying to factory reset a device just to remove pattern code because apps, data & some user settings will wipe out.

This tutorial will show you how to read and unlock the pattern lock of any MTK device without factory reset it.


Just watch the video or follow the steps below



Download and install MT65XX drivers from here
Download Miracle Box from here
Launch Miracle Box
Under MTK Tab, Click Unlock/Fix
Tick Read Pattern
Click Start Button
Now turn off device and connect to PC using USB cord
Miracle Box will detect device
Wait for few seconds for Miracle to analyse the pattern data of the device
When you see Done, Know the process is complete
The Pattern code will be displayed in numbers which you will input according to the 3X3 matrix input on your phone
Example: 125789
You will draw the pattern from dot 1 to 2 to 5 to 7 to 8 to 9

Download Samsung Galaxy E7 Stock Firmwares

Samsung Galaxy E7 Specs

OS
Android 4.4.4 kitkat upgradeable to 5.1.1 lollipop

151.3 x 77 x 7.3mm in dimension
5.5 inches display
720 x 1280px in resolution (267ppi)

PLATFORM
Qualcomm MSM8916 Snapdragon 410 Chipset
Quadcore 1.2GHz Cortex A53 CPU
Andreno 306 GPU

MEMORY
16GB internal
2GB RAM
up to 64GB microSD

13MP Back Camera & 5MP front Camera

GSM/HSPA/LTE Network
***********************************************************************************************

Download Samsung Galaxy E7 Stock Firmware form links below




The firmware above can be flash using Odin

- Download and install samsung drivers
- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process

For a more detailed process on how to flash or upgrade Samsung devices, click here

DOWNLOAD TECNO Y2 STOCK ROM/FIRMWARE


Learn how to unbrick/flash this device using sp flash tool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Related Posts

Related Posts Plugin for WordPress, Blogger...